Ancient Style Tile Manufacturer

Interior wall tiles are a type of ceramic tile, primarily used for indoor wall decoration. They consist of three parts: the body, the bottom glaze layer, and the top glaze layer. The water absorption rate of the body is generally around 10-18%. The weight of the bottom glaze applied is 40-60 grams, while the top glaze is 90-160 grams. In general, the higher the firing temperature, the greater the top glaze weight, resulting in better luster and a smoother surface for the tile. Of course, the quality of the glaze also has a significant impact.

Inspection Standards: 1. For wall tiles, there should be no hollow spots. Hollow spots are permissible at the edges of tiles, but the total number of hollow spots in a single room should not exceed three. You can use this standard to inspect the wall tiles in our indoor kitchen and bathroom.

2. The standard for perpendicularity is that the verticality of the tile's face must be controlled within 3mm. Otherwise, it is not qualified.

3. The standard requirement for flatness is that the tiles must not exceed a flatness error of 2mm. Additionally, the height difference between adjacent tiles should not exceed 0.5mm. Tiles exceeding the error are considered不合格, and we can request their removal and re-laying.

4. The level or verticality error in tile joints must not exceed 0.5mm. In fact, it's visible to the naked eye if it does. Additionally, measure the vertical and horizontal level of tile joints before filling, as the filler can cover them up, making it difficult for us to measure later.