As society develops and household consumption levels rise, home decoration has become a highly valued matter. Every detail is not to be overlooked, so many people choose to lay tiles to enhance the decorative effect. However, many are non-professionals and wonder how to improve the tile laying quality? Today, follow Zibo Engineering Tiles to learn together, hoping it can help everyone.

One: Prior to laying, first soak the interior wall tiles in clean water for about an hour until no bubbles appear. Remove the water from the tile surface, sprinkle some water on the leveling layer, then apply a 1:2 cement mortar evenly on the back of the tile, with a thickness of 5-6 millimeters. For large-sized interior wall tiles, increase the thickness slightly. Immediately lay the tile, gently tap it flat with a wooden awl or a rubber mallet, and then use a straight edge or a level to ensure it is level.

During installation, leave a 2-3mm grout gap between tiles as needed to prevent tile detachment and hollow sound due to differing thermal expansion and contraction coefficients between the wall and tiles.

After applying a certain area, fill and smooth the grout between the bricks with the sealant, then clean the brick surface of any dirt with a damp cloth to enhance maintenance.

Zibo Engineering Tiles advises to carefully consider the design's installation requirements when marking out, determining the brick layout scheme. Then, on the dried leveling layer, mark the position of the tiles and the brick joint lines.

For more information about Zibo Engineering Tiles, please visit our website for updates. http://www.zbxingyuetaoci.com