What are the methods for pipe unclogging? Today, staff will share with us the common methods for pipe unclogging and the special methods required by users. The original log excavation method first inserts a log with a diameter very close to that of the drain pipe, and then a large amount of water is injected into the pool.
Then, swiftly move the logs up and down. The dirt in the pipes under pressure and suction can be cleaned with baking soda and vinegar methods. First, pour the dissolved powder into the drain, followed by a high concentration of vinegar. Baking soda and vinegar can remove strong reactions in the oil delivery pipes and other sticky items. For pipe unclogging, a plastic pipe with a diameter of about 15 millimeters and a length of 10 meters is used.
Place the nozzle on the faucet, position it close to the wire wrapped around the rubber hose at the other end, insert it into the drain outlet, turn on the faucet, unscrew the largest screw, the water pressure and rapid flow will flush out the pump blocking nearby the small pipe.
The air tube is inserted into the drain pipe, the outlet is sealed, sufficient water is injected, and the drain is quickly lubricated.
The above methods are for reference only. There is a certain risk involved in clearing pipes using these methods. Ensure safety when using them.
News Center Co., Ltd.
