In essence, as the saying goes, food is the essence of life, and it's hard for anyone to resist the allure of delicious cuisine. Therefore, when it comes to home renovations, the kitchen often receives special attention. However, there are still precautions to take when installing kitchen equipment in Suzhou. What knowledge have you all gleaned from this read?

Professional technical skills are required for kitchen equipment installation, which generally follows these steps: preliminary wall and floor treatment, product inspection, installation of wall cabinets, installation of base cabinets, connection of water supply and drainage, installation of matching appliances, testing, adjustment, and cleanup. Specific construction precautions include: 1. The installation of wall cabinets should use different fixation methods depending on the type of wall. The back panel length should be 10 cm shorter than the cabinet length. For back panels up to 50 cm, use 2 reinforcing screws, and for those up to 80 cm, use 3 reinforcing screws, with screws not shorter than 5 cm. During installation, first level the cabinet body, then adjust the hinges to ensure the door panels are horizontal and vertical. The height of the wall cabinets should be more than 1.5 meters from the ground. When decorative line panels are needed above the wall cabinets, ensure they are level with the cabinet body and door panels. For two wall cabinets connected, remove the screws and clips, connect with wooden screws, and ensure both cabinets are level and the door gaps are even.

2. When installing the base cabinet, adjust the level buttons first to ensure that the countertop and front of each cabinet are on the same level surface. Connect the two cabinets using wooden screws, and route pipes through the back panel. The gauge and valves should be marked and drilled on the back panel to allow for the avoidance of equipment. No saw-tooth shapes should be present on the side of the holes.

3. When installing the bottom panel of the washing cabinet, a plastic round washer should be added at the drain hole. The connection of the drain pipe should ensure no leakage or seepage, and no adhesive should be used to connect the joints.

When installing the stainless steel sink, mark and cut a groove on the countertop according to the sink's model and size. Securely fasten and level the sink to the countertop using the provided hanging screws, seal the edges with sealant, ensuring the connection between the sink and countertop is even and waterproof.

5. During installation, directly drill holes on stainless steel plates or other surfaces. Ensure a secure installation without any leakage during water connection.

6. When installing an exhaust hood, follow the manufacturer's instructions for the specific hood model. Pay attention to the size compatibility between the overhead cabinet and the hood cover, ensuring a coordinated and unified look.

Certainly! Here's the translated content: "Actually, these installation and construction注意事项 for Suzhou kitchen equipment are quite informative. What knowledge did everyone learn from this? In reality, these insights are highly beneficial to many. So, take a look at these details above."