Steel wire mesh mineral wool board applications

Rockwool Board (SKADA Building Series) Technical Parameters: Inspection Items Standard Requirements Measured Values

Appearance: Flat surface, no scratches, stains, or damage. Flat surface, no visible scratches, stains, or damage.

Dimensions: Length mm 1200+15-3 1203

Width mm 600 600

Thickness mm: 50+5-3, 51

Density kg/m³   ——   180

% Fines Content (particle size greater than 0.25mm) ≤ 10 3.8

Flammability Properties * *

Average Fiber Diameter μm ≤ 7.0 4.3

Thermal Conductivity W/(m·K) (average temperature 25℃) ≤ 0.040 0.039

Water Repellency % ≥ 98.0 99.9

Tensile Strength Kpa ≥7.5 15.2

Compressive Strength Kpa (10% deformation) ≥ 40 77.6

Acidity, coefficient ≥1.6, 2.0

Features:

Fire-resistant

Schacter mineral wool raw materials are made from natural volcanic rock, an incombustible building material and fireproofing material.

Primary fire-resistant features:

☉ Rated A1 fire rating, effectively preventing the spread of fire.

The dimensions are extremely stable; they will not elongate, contract, or deform in a fire.

High-temperature resistant, melting point above 1000°C.

No smoke or burning droplets/particles produced in fire.

✦ No harmful environmental substances or gases are released in case of fire.

Insulation and heat preservation

Scotia mineral wool fibers are fine, long, and flexible with low slag content. Therefore, thermal conductivity

Low coefficient, with good thermal insulation effect.

Sound Absorption and Noise Reduction

Scotia Rockwool is an ideal soundproofing material; its abundance of long, slender fibers form a multi-

Hole-jointed structure makes Sichada mineral wool an excellent sound absorption and noise reduction material.

Hydrophobic

Schacter's water-repellent mineral wool products have a water-repellency rate of up to 99.9%; low water absorption.

No capillary penetration.

Moisture-resistant properties

Scotia Rockwool, in environments with high relative humidity, has a moisture absorption rate less than

0.2%; tested according to ASTM C1104 or ASTM 1104M method, quality absorption

Moisture content less than 0.3%.

Non-corrosive

Scotchgard mineral wool has stable chemical properties with a pH value of 7-8, neutral to slightly alkaline, suitable for carbon steel, stainless steel,

Aluminum and other metal materials are all non-corrosive.