Edge Wall Fan Installation Instructions:

Before installation, it is essential to thoroughly inspect the fan for any damage or deformation before proceeding with the installation.

The weight of the pipe connecting to the fan casing should not be supported by the fan casing itself; additional support should be added during installation.

Collectors must be installed at the fan's air outlet, along with protective meshes.

Ensure that all components are securely fastened during installation and check for any loose parts. The blades should have an even gap with the glass fiber wall fan's air duct, and they must not collide.

The perimeter fan should be kept clean at all times, and no debris should be present on the fan surface. Regularly remove dust and other debris from the fan and its ducts.

Boundary Fan Protection Sweep

1. Key Attention Points in Wind Turbine Protection Operations: If the wind turbine is started after repair, pay attention to whether all parts of the turbine are functioning normally. ④ Protection of the wind turbine must be carried out when parked. In addition to replacing the lubricant after each disassembly and repair, it should be replaced every six months under normal conditions.

2. Primary issues with fans and their causes: Friction between the housing or inlet and the impeller; poor installation of the fan's inlet and outlet air ducts leading to resonance; blade wear; all require timely repair and replacement of parts. This leads to increased fan load and motor load. Operating temperature: -20℃ to 40℃; Temperature: <90%; Medium conditions: ----Standard Type: Non-corrosive, non-flammable, non-explosive gases.