Conveyor belts should be kept clean during transportation and storage, protected from direct sunlight, and shielded from rain, snow, and chemical substances such as acids, bases, oils, organic solvents, and others. They should also be kept at least 1 meter away from electric heating equipment.

During storage, the environmental temperature in the warehouse should be maintained between -15°C and 40°C, and the humidity should be kept between 50% and 80%.

3. During storage, the conveyor belt should be rolled up and not folded. A submission should be made quarterly during the storage period.

4. The conveyor belt's operating speed must not exceed 5.0 m/s. When transporting large or damaged items, or when using mobile scraper unloaders, it is advisable to use the low-speed gear. Exceeding the specified speed can harm the conveyor belt's lifespan.

5. To better reduce the impact and damage of raw materials on the conveyor belt, the feeding direction should align with the belt's operational path; it is advisable to minimize the overflow of raw materials onto the belt; the feeding opening should be prevented above the roller or drive shaft; the spacing of buffer idlers should be reduced, and the receiving section of the belt should adopt mitigation measures. To avoid scarring the belt, the contact area between the material挡料刮刀cleaner and unloading equipment should use a rubber plate with suitable strength, rather than a belt from the fabric layer.

6. Conveyors should be kept clean during transportation and storage, protected from direct sunlight, and shielded from rain, snow, and other inclement weather. They should avoid contact with acids, alkalis, oils, organic solvents, and other chemicals, and be kept at least 1 meter away from electric heating equipment.

7. Throughout the entire application process, pay attention to the following matters regarding conveyor belts:

To prevent the drum from being covered by raw materials, causing it to fail to rotate properly and avoid leakage getting caught between the drum and the tape, pay attention to the lubrication of fitness equipment components, but do not lubricate the conveyor belt.

B. Minimize operation under load.

C. A tape error has occurred; immediate effective measures should be taken to rectify the issue.

D. Partially damaged tape should be repaired immediately to prevent expansion.

Prevent tape from being blocked by structural supports, pillars, or small raw materials, and avoid its cracking and tearing.