Unconventional Stainless Steel Ceiling Technology Process: Jiangsu Suqian Huayou Advertising Equipment Technology Co., Ltd.: Introduction as follows:
Using 2.0mm thick 304 stainless steel, laser-cut processed, shaped into the desired design, and then cut to the proper size using a shearing machine. The shaped 304 stainless steel sheets are then bent into the desired form using a bending machine.
The laser-processed shapes are then welded onto the sheets cut by the shearing machine using an argon arc welding machine for connection.
Three; Pay close attention not to warp the plates during welding, as stainless steel sheets are highly ductile and prone to deformation. Ensure that the welder maintains a flat and aesthetically pleasing finish.
Welding is complete; the surface must be finely polished to ensure there are no burrs to prevent injury. Once polishing is finished, use a buffing machine for further polishing.
Five; Once completed, thoroughly inspect the items before sending them into the professional spray painting room for a 300-degree high-temperature coloring process.
Jiangsu Suqian Huayou Advertising Equipment Technology Co., Ltd.: Specializing in the production of stainless steel: bus shelters, billboard kiosks, waste sorting kiosks, signboards, lighting pole billboards.