Silicone hydrophobic agent (waterproofing agent) - colorless and transparent liquid for spraying

Silicone hydrophobic agent (waterproofing agent) colorless transparent liquid for spraying

Silicone exterior waterproofing agent is commonly used for waterproofing and protective purposes on porous inorganic substrates (such as concrete, tiles, clay bricks, stone, etc.) that do not withstand water pressure, including brick walls, veneer exterior walls, and coated or stone-clad exterior walls for waterproofing, moisture resistance, stain prevention, color retention, and resistance to weathering. Waterproofing tiles and other exterior walls without altering the original base color. Application methods include spraying and brushing. It is used for waterproofing, leakage prevention, and moisture resistance on the exterior walls of various buildings, warehouses, and sloped roofs; for waterproofing, color retention, pollution prevention, resistance to weathering, prevention of salt efflorescence, and frost-thaw spalling on ancient buildings, stone tablets, tiles, marble, granite, and other decorative surfaces; and for preventing the growth of mold and moss on walls. It can also be used for hydrophobic treatment on concrete pavers and the surfaces of inorganic thermal insulation materials, particularly suitable for various tiles and granite wall surfaces. This agent does not block the capillary pores and micropores on the surface of buildings, does not affect the release of moisture vapor within and inside the walls, providing both moisture resistance and breathability. It forms an invisible, breathable hydrophobic film on the exterior walls, akin to putting a transparent, breathable raincoat on the building, preventing moisture from moistening and penetrating the walls, and safeguarding against wall dampness, mold growth, discoloration, and peeling.

Silicone waterproofing agent is a waterproofing material.,Spray coating(Or coated)After the surface of the building,A colorless and transparent, breathable film can be formed on its surface.,When it's hit by rain or encounters moist air,Droplets will naturally flow,Prevent moisture intrusion,You can also rinse off the dust from the building surface.,Thus, it serves the purposes of moisture and mildew resistance for interior walls, cleanliness for exterior walls, and prevention of weathering.

Product Features

Waterproof, mold-proof, and stain-resistant; surface without coating film, no discoloration.

PresentsFreezing, high-temperature, and acid-base resistance.

Strong adhesion, capable of filling minor cracks in the base material, does not block the capillary pores of the base material, and has breathability.

Extend the service life of the base material under harsh conditions.

Easy and quick installation, no maintenance required, with a low overall cost.

Wide-ranging, suitable for waterproofing on multiple substrates without damaging the decorative layer.

Application Scope

Waterproof, moisture-proof, stain-resistant, and surface treatment solutions for various substrates including cementitious surfaces, clay, tiles, plaster, stone, wood, bricks, and tiles.Interior and exterior walls, floors (including tiles and stone for walls and floors), partition walls, roofing, pools, and landscape shapes, etc., with waterproof and moisture-proof treatments. Simple repair work for failed waterproofing layers.

Instructions for Use

One. Spray coating

Prepare base surface; the base material surface must be clean and dry, free of stains.

Dilute the material with water, silicon.Water ratio∶1∶10-12(Compatible with water-based paints for mixing use.)

After dilution, apply directly by low-pressure spraying or brushing onto the substrate surface.

Apply evenly in sprays or coatings until the surface is fully absorbed and moist.

No water needed; simply air dry.12-24Water-repellent effect achieved upon full curing within hours.24-48Waterproofing performance is achieved upon curing within hours. Dosage: For each liter, use an area of6㎡ (The final amount will depend on the density of the base material).

Section II: Waterproof Mortar Mix

As per silicon∶Water content ratio1∶15Dilute into silicone water.

The mix ratio for waterproof mortar is: cement∶Sand∶Silica Water=1：2.5：0.6Proportionally mix waterproof mortar.

Apply the mortar coating to the base surface according to the waterproof mortar application method.

Performance specifications

As an additive product, it meets national standards.J74-1999Mortar Concrete Waterproofing Agent