C60 High-Strength Grouting Material - Self-Compacting Micro-Expansive Self-Leveling Grouting Material Manufacturer

C60 High Strength Grouting Material, Self-Compacting Micro-Expanding Self-Leveling Grouting Material Manufacturer

Non-shrink grouting material is made by using cement as the binder, supplemented with high fluidity, slight expansion, and anti-segregation substances. It can be used after adding a certain amount of water at the construction site, mixing it thoroughly. The grouting material features good self-leveling, rapid hardening, early strength, no shrinkage, slight expansion, non-aging, resistance to water quality and surrounding environment, good self-sealing properties, and anti-corrosion. It offers reliable quality, cost reduction, time-saving, and ease of use in construction. It fundamentally alters the load-bearing condition of equipment bases, allowing them to uniformly bear the full load of the equipment, thereby meeting the installation requirements of various mechanical and electrical equipment (heavy equipment). It is the ideal grouting material for the era of padless installation.

Product Features

Primarily used for: anchoring anchor bolts, emergency repairs of airport runways, fixing nuclear power equipment, reinforcing road and bridge projects, machine bases, steel structures and foundation sockets, secondary grouting of equipment foundations, embedded steel reinforcement, reinforcement and renovation of concrete structures, treatment of cracks in old concrete structures, installation of mechanical and electrical equipment, track and steel structure installation, static pile engineering pile sealing, building reinforcement, increasing beam and column cross-sections, thickening wall structures and dealing with water leakage, grouting for various foundation engineering collapses, and various emergency repair projects. Stainless Steel Reinforcement

Suitable for bending, shearing, and tensile stresses in beam, slab, and column components primarily subjected to static loads, as well as for reinforcing columns under compression. If used for reinforcing beams and slabs under compression or components with significant dynamic loads, additional anchoring measures should be implemented; for example, every100mmConfigure2An anchor bolt for grouting or tensioning through beams or plates. Suitable for reinforcing beams, slabs, and columns against bending, shearing, and tensile forces, and for reinforcing components subject to significant dynamic loads. The applicable range is the same as (AUsed for components requiring a significant increase in load-bearing capacity.

Application Scope

Suited for anchoring new and old members subjected to bending, shearing, compressive, and tensile forces. Chemical grouting reinforcement for crack repair, restoring the integrity and functionality of cracked concrete and masonry components, blocking medium erosion, and hole repair reinforcement for concrete and masonry components' holes, depressions, and insufficient cross-sections. Suitable for beam and slab reinforcement against bending and tensile forces. Section reinforcement, suitable for structures requiring increased self-weight, cross-sectional area, and aesthetic changes.

Product Categories

1主要用于: anchoring foot bolts, cutting and embedding steel bars, grout layer thickness30mm<δ<200mmThe secondary grouting of equipment foundations based on the initial equipment foundation. For equipment foundations with oil resistance requirements, the secondary grouting is referred to as ordinary grouting material.

2主要用于: Grouting layer thickness≥150mmThe secondary grouting of the equipment foundation. Reinforcement and strengthening (repair thickness) of the building's beams, slabs, columns, foundation, and floor slabs.≥40mmEquipment foundation secondary grouting with oil resistance requirements, referred to as reinforcement work. Grouting material.

3主要用于: Prestressed duct grouting, grouting layer thickness10mm<δ<150mmEquipment secondary grouting, steel angle reinforcement grouting between concrete beams and columns, known as concrete joint grouting Grouting material.

4Primarily used for: installation of large and complex equipment; reinforcement and reconstruction of concrete structures; rapid road repairs; shrinkage-free grouting material.

5主要用于: High-temperature environments GROUT MATERIAL, with high temperature stability and good thermal shock resistance, equipment can maintain long-term exposure to high radiation temperatures500°C environment, grouting layer thickness30mm<δ<200mmThe secondary grouting of the equipment's foundation, referred to as heat-resistant grouting material.

6Primarily used for: Short construction time.2Hour IntensityC20Ready-to-run equipment, grouting layer thickness30mm<δ<200mmSecond pour to expedite project schedule, referred to as emergency repair work Grouting material.

7Primarily used for grouting requirements of large-volume, tall, and complex structural equipment, ensuring no dead corners are left ungrouted. Offers excellent stability, suitable for equipment classified as extra-large heavy-duty machinery. Grouting material, equipment for designation, extra-large heavy-duty machinery Grouting material.

8主要用于: rapid strength gain under sub-zero temperatures, unaffected by frost damage, anchoring and embedding foundation bolts, reinforcing bars, and grouting layer thickness30mm<δ<200mmThe secondary grouting of equipment foundations with oil-resistant requirements is referred to as frost-proof grouting material.