Non-flammable Mortar Supply - Manufacturer of Non-sparking Cementitious Materials

Non-flammable Mortar Supply - Manufacturer of Friction Non-Flammable Cementitious Materials

With the rapid development of science, the construction industry has also raised the requirements for the ground, including flammable, explosive, and fire-resistant sites.

Flammable goods warehouses, electronic workshops, areas prone to sparks, military supplies or explosive factories, aircraft hangars, textiles, pulp, printing plants, storage facilities, port装卸areas, machinery factories, aircraft parking areas, parking lots, fuel depots, corridor floors, industrial chutes, bridge surfaces, reservoir spillways, energy dissipation pools, loading/unloading ramps, enterprises, textile industry, cold storage facilities, automotive industry, electronics industry, highways, and other surfaces also utilize. The non-sparking, wear-resistant, friction-resistant, high-strength, and easy-to-install fire-retardant cement mortar developed by Beijing Shunjian Xingye Engineering Technology Co., Ltd. complies with current construction and acceptance standards.SJ/T 31469-2002Regulations on the Construction and Acceptance of Static-Dissipative Floor and the Quality Acceptance of Building Floor Construction regarding non-flammable terrazzo, current provisions. Manufacturer of non-flammable fine-grained concrete.

Unextinguished cement mortar raw material composition

1.The sand is made from dolomite, and it does not produce sparks when rubbed against hard objects such as metals (iron, copper, etc.).

2.Cement is made of special non-explosive cement, with a grade.42.5RThe above

3.Special Non-Flammable Abrasion-Resistant Aggregate (Metallic Aggregate)

Above are the main components of non-sparking cement mortar, with special additives to ensure the mortar's strength, crack resistance, shrinkage-free, and bending resistance, and a non-sparking ground fine sand and cement mortar.

Non-flammable cement mortar floor features

1.After construction, metal objects do not produce sparks when rubbed against the ground.

2.High strength, high wear resistance, no shrinkage, high crack resistance, good bond with concrete

Non-flammable cement mortar construction plan

Firstly, prepare the subgrade concrete floor, ensuring no soil or debris is present. After cleaning, use high-pressure water to rinse. One day prior to construction, pre-moisten the subgrade concrete to ensure adequate moisture during the work. Locate the elevation points.Tie wire, or apply mortar directly. Mix the mortar according to the water-cement ratio provided by Beijing Shunjian Xingye Engineering Technology Co., Ltd. for non-igniting cement mortar, apply the skim coat (to ensure a more stable bond between the concrete and mortar surfaces), adjust the water-cement ratio of the mortar on-site as needed, and construct in a convenient manner or reduce the water content. Lay the cement mortar surface, then use a trowel for leveling. Afterward, use a steel trowel for one pass of smoothing, followed by two and three more passes. Once done, cure the mortar. The curing period is:7Day (maintenance can also be carried out at the construction site)3Next day, one-day maintenance2Next).

Beijing Shunjian Xingye Engineering Technology Co., Ltd. produces non-sparking cement mortar that meets standard requirements and has been successfully applied in various projects such as oil depot renovations (Tianjin Dagu Oilfield, Dongying Shengli Oilfield), Beijing CNG station renovations (Shanxi to Beijing Gas Pipeline Project), electronic workshops, storage warehouses, coal mine storage facilities, logistics warehouse flooring (paint and coating storage in Tianjin Port warehouses), and other cases, earning recognition from non-sparking, abrasion-resistant flooring clients. Construction methods for fireproof and explosion-proof flooring mortar materials.

Surface Treatment

1Newly constructed industrial flooring requires certain maintenance before it can be used for construction, approximately...28Day.

2Surface cement laitance, old paint, and adhered debris.

3Surface oil stains should be treated with Kerosene King cleaner.

4Drain excess water and dry the damp areas.

5Surface cleaning must be done with a dust-free sweeper and a large vacuum cleaner.

6Flat surface allows for gaps of2~2.5mm, Moisture content6Below,PHValue6~80。

7The surface of the floor needs to be roughened using a dust-free grinder and then cleaned with a vacuum cleaner.

8The holes and obvious dents on the floor surface should be filled and scraped. After the material has dried, sand and vacuum the surface.

Two, leveling layer construction

Clean the leveling layer, ensuring that any floating dust or broken partition strips are swept clean. To ensure a strong bond between the surface mortar and the leveling layer.

Section 3: Static Dissipative Grounding Metal Mesh for Inner Lining

Four,20-30Thick-set non-flammable mortar