This vacuum pump is designed for high vacuum levels, low flow rates, and is suitable for mines with moderate pumping volumes and high vacuum requirements.

This vacuum pump features high vacuum, low flow rate, and is suitable for mines with moderate pumping volumes and high vacuum requirements. The water ring vacuum pump is highly safe and is generally required in mines that demand higher vacuum levels, thus enjoying widespread use. As the gas compression within the water ring pump is isothermal, it can extract flammable and explosive gases, as well as dusty and humid gases, leading to its increasing application. However, some users have reported issues with the water valve during operation. Today, let's explore the potential problems that may arise with the water valve during use.

The water ring vacuum pump drain valve should be installed according to the drawings.

2. Sealant washers should be used at the connection points to ensure no leaks.

The water ring vacuum pump's water supply pipe and stuffing supply pipe can be connected together.

4. When adjusting the installation location of the throttling valve, it's crucial to ensure that the water ring vacuum pump and the separation connection are not overly extended. Otherwise, as steam and water flow together through the pipeline, the outlet resistance will increase, vacuum will decrease, and power consumption will rise.

Here are several things to note when using water ring vacuum pumps and handling the water valves, which we hope will be helpful to you. If you have any other questions, please feel free to contact us for consultation at any time.