Before using the钉式橡胶挤出机 to produce products, we must first heat up the equipment. The temperature control unit of the equipment should be selected based on the length of the screw. Generally,钉式橡胶挤出机 can be divided into three to five groups of control units, each controlled by a mold temperature machine. When producing products, we first need to heat up the equipment, and only when the equipment reaches the required temperature can we start the machine and fill the rubber into the feed system of the extruder. After the rubber enters the barrel through the feed system, it is sheared, compressed, and mixed by the rotating screw for a series of treatments. The rubber production process can be said to be mainly driven by the extruder barrel and screw, so we know that the design of the barrel and screw is the most critical part of the entire equipment. After being processed and manufactured by the barrel and screw with pins, the rubber is extruded into the desired product shape at the extruder die. The rotation of the screw during the production process is driven by the motor, which transmits power to the transmission box, then driving the rotation of the screw. Therefore, the whole钉式橡胶挤出 machine consists of the feed system, temperature control system, barrel and screw, extruder die, speed reducer motor, and the entire body frame.
Adaptable design systems capable of meeting customer design requirements in a short time. Equipped with various nozzles, it can be used for feeding, sheet extrusion, tube extrusion, and extrusion of special profiles.
Hebei Shuangda Machinery and Equipment Manufacturing Co., Ltd.'s rubber tube extruder features a cold feeding system that prevents leakage from the feeding roller. The Changzhou hard tooth surface reducer drives the feeding mechanism, controlling the amount of rubber fed and reducing damage to the multi-barrel screw that would otherwise cause leakage, thereby extending the equipment's service life.
