A copper bar bending machine is a common metal processing equipment used for bending copper bars. When using the copper bar machine, attention should be paid to the following aspects:

　　1Prior to use, the equipment must be inspected and maintained. Ensure all components are intact and undamaged, lubricants are sufficient, and power supply is normal. If any malfunctions or anomalies are detected, they should be repaired or replaced promptly to ensure the equipment operates smoothly.

　　2When in use, safety operations should be observed. Operators must wear protective gear, such as helmets, safety goggles, and protective gloves, to prevent accidental injuries. Remain focused during operation and avoid touching the moving parts of the equipment to prevent accidents. Additionally, be mindful of the environment around the equipment to ensure there are no obstructions or other individuals nearby to prevent harm.

　　3Maintain temperature control during the copper busbar bending machine processing. Copper busbars can be affected by heat during processing, and excessive temperatures may lead to deformation or damage. Therefore, it is crucial to regulate the heating temperature and duration to prevent over-heating.

　　4Adjustments must be made according to specific processing requirements. Parameters such as bending angle and speed should be adjusted based on the size and bending angle of the copper busbar. Caution is required when adjusting parameters to avoid over-adjustment or under-adjustment, which may affect processing quality.

　　5After use, it is essential to promptly clean and maintain the equipment. When cleaning, ensure the power is disconnected and use only dedicated cleaning agents and tools to keep the device clean and operating smoothly. Additionally, perform regular maintenance and care, such as changing lubricants and inspecting power lines, to extend the equipment's lifespan.