Currently, requirements for packaging are becoming increasingly stringent. Both food and pharmaceutical products demand hygiene and safety. As a result, there is a surge in the development of automatic sealing machines, and issues with these machines are also on the rise. With years of experience, we provide some solutions to common errors in the daily operation of sealing machines.

During the operation of the sealing machine, it is important to address any malfunctions promptly to avoid affecting production progress. Common issues and solutions are as follows:

Due to inadequate vibration, the blanking is not dense enough; it is necessary to increase the vibration frequency or tighten the fixing screws of the vibration part.

2. Regularly apply lubricant to transmission components such as skateboards, roller bearings, eccentric wheels, guide columns, and guide rails to maintain machine performance.

3. Regularly clean the surface, lower mold base, slider, slots, upper mold plate, and locating rods of the fully automatic sealing machine. Normally, the heat sealing temperature is insufficient. It only increases correspondingly when the overall thickness of the bag increases; if the heat sealing speed is too fast, sealing is not possible. If the speed is too rapid, the sealing component will be transported to the cooling area by the牵引辊 (traction roller) for cooling treatment before heating, which naturally cannot meet the quality requirements of heat sealing. These are repair methods that the company cannot resolve on its own.

Potential Hazards in the Operation of Sealing Machines: If two or more people operate the machine simultaneously, lack of concentration, slips, or unexpected machine malfunctions can easily lead to personal injury. When one person is placing cups, they should pay attention and act quickly. Do not look around. If a cup is placed incorrectly, you should release your hand promptly. If you do not, it may cause other accidents. This operation is a dangerous task with frequent accidents when the equipment is running fast. Any slight deviation in angle can lead to accidents, even more severe ones, so whatever you do, focus your attention.

Summer brings a surge in demand for beer and beverage drinks, leading many producers to experience a peak sales season. Now, the workload of sealing machines is doubling. Some manufacturers may operate intermittently, which threatens the health of the equipment. Machines also require maintenance and rest. Only then can the lifespan of fully automatic sealing machines be extended, bringing more usage to various manufacturers.