Lead wire stone baskets are mechanically woven from high corrosion-resistant, high-tensile, and ductile low-carbon steel wire, or wire coated with PVC. The box-like structures made from this mesh are known as stone笼wire baskets. The diameter of the low-carbon steel wire used varies according to engineering design requirements, generally ranging from 2.0 to 4.0 mm. The tensile strength of the stone笼wire is not less than 38 kg/m², and the weight of the metal coating is typically higher than 245 g/m². The diameter of the edge line of the stone笼sheet usually exceeds the diameter of the wire. The length of the double twisted portion must not be less than 50 mm to ensure that the metal and PVC coatings of the twisted wire are not damaged.

(1) Aperture: 60*80mm, 80*100mm, 80*120mm, 100*120mm, 120*150mm, 90*110mm

The length of the double-strand braiding section must not be less than 50mm to ensure that the metallic coating and PVC coating on the wire in the braiding section remain intact.

(2) Wire Diameter: The stone笼 net is divided into three types of wire diameters – mesh wire, edge wire, and binding wire.

The wire mesh range is from 2mm to 4mm.

2. The edge wire is generally thicker than the mesh wire, 0.5-1.0mm thicker.

3. Bind wire is generally smaller than mesh wire, with 2.2mm being the most common size.

(3) Wire Tensile Strength: Not less than 38 kg/m² / 380 N/mm²

(4) Surface Treatment

Electroplated zinc. Zinc coating of 10g/m². Poor corrosion resistance.

2. Hot galvanized. Zinc coating can reach up to 300g/m². Strong corrosion resistance.

3. Galfan (Aluminum Zinc Alloy). This is divided into two materials: zinc-5% aluminum-mixed rare earth alloy wire, and zinc-10% aluminum mixed rare earth alloy wire.

4. PVC Coated. The coating thickness typically covers 1.0mm, for instance: after coating, a 2.7mm thickness becomes 3.7mm.

Partition: Add a partition every meter along the length of the stone笼 net

(2) Dimensions: Customizable to standard sizes

(3) Aperture and thread diameter range comparison