Product Introduction:
The role of nitrogen in automobiles
1.Enhance tire stability and comfort. Nitrogen is nearly inert, a diatomic gas with extremely inactive chemical properties. Its gas molecules are larger than oxygen molecules, making it less susceptible to thermal expansion and contraction, with a smaller deformation range. The rate at which nitrogen permeates the tire's sidewall is approximately 40% slower than air.30～40%， Maintains consistent tire pressure, enhancing tire stability during travel, ensuring driving comfort; nitrogen has low sound conduction, equivalent to normal air,1/5Using nitrogen can effectively reduce tire noise and enhance driving tranquility.
2.Prevent blowouts and tire skidding. A blowout is the leading cause of road traffic accidents. Statistics show that on highways, there is...46%The traffic accident was caused by tire failure, with tire blowouts accounting for a significant portion of the total tire accidents.70%When a car is in motion, the tire temperature increases due to friction with the ground, especially at high speeds and during emergency braking. The internal gas temperature of the tire rises rapidly, causing a sudden increase in tire pressure, and thus, there is a possibility of a tire blowout. High temperatures also accelerate tire rubber aging, reduce fatigue strength, and cause severe tread wear, which are significant factors contributing to blowouts. In comparison to regular compressed air, high-purity nitrogen, which is oxygen-free and virtually oil-free, has a low thermal expansion coefficient and low thermal conductivity, heats up slowly, and is non-flammable and non-combustible. These characteristics greatly reduce the likelihood of a tire blowout.
3.Extend tire lifespan After using nitrogen, tire pressure remains stable with minimal volume change, significantly reducing the likelihood of irregular tire wear such as cupping, shoulder wear, and uneven wear, thereby extending the tire's lifespan. The aging of rubber is caused by oxidation of oxygen molecules in the air, resulting in decreased strength and elasticity and cracking. This is one of the reasons for the reduction in tire lifespan. The nitrogen separator can effectively remove oxygen, sulfur, oil, water, and other impurities from the air, reducing the oxidation of the tire lining and the corrosion of rubber, preventing metal wheel corrosion, extending the tire's lifespan, and to some extent, reducing wheel rust.
4.Reduce fuel consumption and protect the environment. Insufficient tire pressure and increased rolling resistance after heating can lead to higher fuel consumption during vehicle operation; nitrogen, however, not only maintains stable tire pressure and slows down pressure loss, but also, being dry and oil-free, has low thermal conductivity and heats up slowly. These properties reduce the temperature rise of the tires during movement and minimize tire deformation, improving traction. This reduces rolling resistance, thereby decreasing fuel consumption.
Use Instructions
Toxicity and Protection
1、 Respiratory System Protection: Generally, no special protection is required. However, when the oxygen concentration in the air at the work site is below18%At all times, air breathing apparatus, oxygen breathing apparatus, or a long tube mask must be worn.
2、 Eye Protection: Wear a safety face shield.
3、 Other protection measures: Avoid inhaling high concentrations in enclosed spaces; provide good natural ventilation. Operators must undergo specialized training and strictly adhere to operational procedures. Prevent gas leakage into the workplace air. Handle with care to prevent damage to cylinders and accessories. Equip with emergency leak response equipment.
Fire Emergency Measures and Protection
Evacuate personnel from the leak污染 area to the upwind location and isolate them, strictly controlling entry and exit. Recommend emergency personnel to wear self-contained positive pressure breathing apparatus. Avoid direct contact with the leaked material. Try to cut off the source of the leak. Prevent gas accumulation in low-lying areas, which could ignite and explode upon contact with a flame source. Use exhaust fans to direct the leaked gas to an open area. Properly handle the leaking container, repair and inspect it before reuse.
This product is non-flammable. Keep the container cool in the fire scene with mist spray. Use mist spray to accelerate the evaporation of liquid nitrogen, but do not use a water jet.
Product Brand:Nianlong
Packaging:Steel Cylinder
Specs:40L
Material:Genuine
