Product Introduction:
The role of nitrogen in automobiles
1.Enhance tire stability and comfort during driving. Nitrogen is nearly inert, a diatomic gas with extremely unreactive chemical properties. Its gas molecules are larger than oxygen molecules, making it less prone to thermal expansion and contraction, with a smaller deformation range. The rate of penetration through the tire's sidewall is approximately 40% slower than air.30～40%， Maintains stable tire pressure, enhancing tire stability during travel, ensuring driving comfort; nitrogen has low audio conductivity, equivalent to that of regular air.1/5Using nitrogen can effectively reduce tire noise and enhance driving tranquility.
2.Prevent tire blowouts and flats. Tire blowouts are the leading cause of road traffic accidents. Statistics show that on highways, there are...46%The traffic accidents were caused by tire malfunctions, with tire blowouts accounting for a significant portion of the total tire accidents.70%When a car is in motion, tire temperature increases due to friction with the ground, especially during high-speed driving and emergency braking, leading to a rapid rise in internal gas temperature and a sudden increase in tire pressure, thus posing a risk of a blowout. High temperatures also accelerate tire rubber aging, reduce fatigue strength, and cause severe tread wear, which are significant factors contributing to blowouts. Compared to regular compressed air, high-purity nitrogen, being oxygen-free and virtually free of moisture and oil, has a lower thermal expansion coefficient and lower thermal conductivity, heats up slowly, and is non-flammable and non-combustible. These properties greatly reduce the likelihood of a blowout.
3.Extend tire lifespan After using nitrogen, tire pressure remains stable with minimal volume change, significantly reducing the likelihood of irregular wear such as crown wear, shoulder wear, and side wear, thereby extending the tire's lifespan. The aging of rubber is caused by oxidation from oxygen molecules in the air, which leads to a decrease in strength and elasticity and cracking, one of the reasons for a shorter tire lifespan. Nitrogen separator units can effectively remove oxygen, sulfur, oil, water, and other impurities from the air to the maximum extent, reducing the oxidation of the tire inner lining and the corrosion of rubber, preventing corrosion of metal wheel rims, extending tire lifespan, and to some extent, reducing wheel rim rust.
4.Reduce fuel consumption and protect the environment. Insufficient tire pressure and increased rolling resistance after heating can lead to higher fuel consumption during driving. Nitrogen, however, not only maintains stable tire pressure and delays pressure drop, but also, being dry and free of oil and water with low thermal conductivity, it warms up slowly. These properties reduce the temperature rise of the tire during movement and minimize tire deformation, enhancing traction. This, in turn, lowers rolling resistance and achieves the goal of reducing fuel consumption.
Usage Instructions
Toxicity and Protection
1、 Respiratory System Protection: Generally, no special protection is required. However, when the oxygen concentration in the air at the work site falls below18%At all times, air breathing apparatus, oxygen breathing apparatus, or a long tube mask must be worn.
2、 Eye Protection: Wear safety goggles.
3、 Other protection measures: Avoid inhaling high concentrations in confined spaces, ensure good natural ventilation. Operators must receive specialized training and strictly adhere to operational procedures. Prevent gas leakage into the workplace air. Handle with care to prevent damage to cylinders and accessories. Equip with emergency leak response equipment.
Fire Emergency Measures and Protection
Evacuate personnel from the leaking contaminated area to upwind locations and isolate them, strictly controlling entry and exit. It is recommended that emergency personnel wear self-contained positive pressure breathing apparatus. Avoid direct contact with the leaked material. Try to cut off the source of the leak. Prevent gas from accumulating in low-lying areas, as it can ignite and explode upon contact with an ignition source. Use exhaust fans to direct the leaked gas to an open area. Properly dispose of the leaking container, repair and inspect it before reuse.
This product is non-flammable. Keep containers cool in the fire scene with fog-like water. Use fog-like water spray to accelerate the evaporation of liquid nitrogen, but do not use water hoses to shoot at it.
Product Brand:Nian Long
Packaging:Steel Cylinder
Specs:40L
Material:Regular
