详情描述

The sterilization pot for edible mushrooms is a device designed for sterilizing various mushroom blocks. It can be sterilized according to high-temperature and high-pressure standards. The number of mushroom blocks the pot can hold can be adjusted to meet requirements, completing processes such as heating, sterilization, and cooling. Currently, the edible mushroom sterilization pot uses computerized automation control. The mushroom blocks are placed on a trolley and smoothly pushed into the tank for sterilization. After sterilization, they are cooled and removed from the oven for planting.


[Product Introduction]:


1. The sterilizer top features pressure relief, exhaust, valves, pressure gauge tube openings, and is equipped with insulation to effectively conserve energy.

2. The door opening method is: a manual quick-opening design with a safety interlock device, which can meet the needs of rapid production while ensuring the personal safety of the operators.

3. The equipment allows for segmented settings of sterilization temperature, pressure, and time, with automatic control to save labor and minimize operator errors.


[Structural Features:]


This product's container is made from Q345R specialized sheet material, offering excellent corrosion resistance and a longer service life—up to 3-5 times that of standard sheet material.

2. The product utilizes an immersion-type electric heating tube for heating, consumes less electricity, and heats up quickly.

3. Multiple heating methods are available, such as liquefied gas, natural gas, and coal stoves, tailored to the specific requirements of the customer.

4. The safety valve can automatically release excessive pressure when the steam pressure exceeds 0.2 MPa.


[Important Notes]:


Do not open the pressure cooker before all the gas is released.

2. If the sterilized culture medium is not removed from the pot in a timely manner, open the pot lid after all steam has been released; never leave the medium sealed in the pot overnight.

3. Do not release steam too quickly when the pressure gauge needle is above 0.05 MPa to prevent damage to the mycelium packages.

4. During operation, please handle with care.

The door seal groove is located on the container's cylinder, or it can be on the door itself, offering a firm and reliable seal without any air leakage.