Intelligent greenhouses not only require sturdy supports, but also careful selection of greenhouse film is a crucial factor in constructing large-scale greenhouses. Years of practical results have proven that the proper use of greenhouse film can achieve the goals of cost reduction and increased yield.

One, improvements to related facilities are necessary. For the droplet film to allow beads of water to flow smoothly along the surface without dripping onto the crops, it is essential that the angle is correct and there are no obstructions. Therefore, the height-to-span ratio of the greenhouse should be reasonable, the spacing between arches should be appropriately reduced, and the distance between the tension rods and cables should be maintained to ensure smooth water flow.

The intelligent greenhouse performs surface treatment on the frame materials of the greenhouse structure. The arch rods are rough and spiky, which can easily puncture the greenhouse film. The steel frame requires rust prevention treatment after three years, involving the application of silver paint. It is not advisable to paint or wrap with used film, as this may cause the film to solidify and tear.

Three, properly employ greenhouse film adhesive technology, typically using pad molding machines or irons for heat sealing. The overlap width for heat-sealed overlap with heat-plastic machines should be above 3cm, and for iron heat-sealed overlap, it should be between 6-8cm, while ensuring a strong bond.