The SP-30LNG nitrogen generator is required for the continuous and safe operation of the Agilent-6540 UHD Accurate-Mass Q-TOF LC/MS.
Work Conditions:
1. Operating Voltage: 220 - 240
2. Environmental Temperature: 5 – 35 °C
3. Relative maximum humidity: 80%
4. Dimensions approximately 700mm x 500mm x 800mm
SP-30LNG Nitrogen Generator Technical Specifications:
1. Utilizing ultra-fine hollow fiber membrane separation technology, environmentally friendly with zero noise, nitrogen flow rate and purity: flow rate range 0-32L/min.
2. Equipped with an ultra-high vacuum system integrated with two air compressors, the inlet pressure reaches up to 145psi, and the outlet pressure can reach 116psi, fully meeting the requirements for multi-stage mass spectrometer gas sources.
3. Air Compressor and Nitrogen Generator Connection: Integrated air compressor. Quick start-up, ready to use immediately. Energy-saving mode for the air compressor, achieving intelligent operation and shutdown.
4. Equipped with dual pressure protection, the system features self-protection in case of abnormal internal pressure in the nitrogen generator. It employs a multi-soundproofing system, with the noise level of the system (including the main unit and compressor) being less than 60dB(A).
5. Withstanding High Humidity: The nitrogen generator can still operate normally under an environment with relative humidity ≥70%.
6. Equipped with an integrated dew removal module, reheating technology, and water storage-extraction system, which effectively enhances drainage efficiency; low dew point nitrogen: <-40°C. Features an internal RAC filter core for removing small molecular hydrocarbons, a multi-stage filtration system, and provides laboratory-grade nitrogen. Free of suspended liquids, phthalates, and particle matter < 0.01um.
7. Equipped with an integrated color touchscreen control interface, real-time pressure monitoring, and a fault record storage system, featuring online service and diagnostic capabilities.
8. Includes the essential toolkit and required spare parts for the normal operation of the equipment, which measures approximately 600mm x 750mm x 610mm, with a 1-year on-site warranty.
9. Offer global chromatography company joint certification, along with certification documents; at least three are required (not sales contracts).
10. One-year warranty period; response time within 24 hours, regardless of warranty status.
