King Boat Aluminum Silicon Welding Wire SAL4043 in stock, now offering 1.2, 1.6, 2.4mm sizes.

Chemical composition compliance standard:GB/T3190-1998

Welding Wire Standard:GB10858-2008Comparable toANSI/AWS A5.10-92

Our company has passedISO9001:2008Quality Management System Certification

Product Packaging: Heat Shrink Sealing+Corrugated Box+Packaging tape

Supply Method: Straight (long)1m，10pounds/Carton(s)And canned (7kg/Plate

 Certified products with quality certificates, material specifications provided.

Our ship aluminum and aluminum welding wire products are suitable for TIG welding, do not require flux, and are not recommended for welding with a MIG welder.

   Aluminum Welding Wire/Welding Rod/Aluminum Alloy Welding Wire/Aluminum Alloy Welding Rod = ER4043 (Aluminum-Silicon Alloy Welding Wire)

Applications: Vessels, locomotives, chemicals, food, sports equipment, molds, furniture, containers, shipping containers.

The color after anodic treatment is grayish white.

Conductivity: Capacity Method20℃Please provide the Chinese content to be translated.OStatus42%IACS；

Density20℃The time2.68g/cm³Melting Temperature:575～630℃

Chemical Composition:Si:4.50-6.0 Fe:0.80 Cu:0.30 Mn:0.05 Mg:0.05 Cr:-- Zn:0.10 Ti:0.20 AL:Remaining stock;

Storage Instructions

1、The product can be stored for over two years under factory-sealed packaging conditions. After unpacking, ensure plastic sealing is maintained and place the product in a dry, well-ventilated area to prevent oxidation of the welding wire surface.

2、Products should be stored in a well-ventilated, dry area, isolated from acidic, alkaline, and oily mediums.

3、After unpacking the welding wire, it is recommended to apply a dust cover to the surface of the wire.

4、For welding wire past its shelf life, it is recommended to perform surface treatment on the wire prior to welding.