Structure
The centrifugal bag filter is equipped with an inner cylinder and a guide tube on the outer side of the drum bottom. The outer cylinder is movably mounted between the inner cylinder and the guide tube. Both ends of the cylinder cover and the bag pull plate are fixedly connected to the outer cylinder. The other end of the bag pull plate is connected to the lower end of the filter bag. The upper end of the spring is connected to the upper end of the outer cylinder, while the lower end of the spring is set on the piston, which is fixed to the inner cylinder. Air holes are provided on the side wall of the inner cylinder, located between the piston and the cylinder cover. An air intake channel is set in the main shaft, which connects to the air holes through the airways in the drum bottom and the internal airway between the inner cylinder and the drum bottom.
Key Features
★ The Bag-type Centrifuge absorbs newly developed products from overseas, mainly used for solid-liquid separation of crystalline materials in industries such as food.
★ Fully enclosed structure. Flat large flip-top design, ensuring the centrifuge's internal chamber is fully sealed from the external environment. This effectively prevents contamination of materials by external factors and also safeguards against material pollution of the working environment.
★ Pneumatic motion system. Utilizes an air source as the power source for the motion component, ensuring cleanliness requirements are met in the industry and food industry.
★ Automatic Bagging Device. Utilizes an automatic bagging unloading method to eliminate the crystal breakage of filter cake caused by scraper unloading.
