The following is a general process for glass partition installation:

Preparation Phase:

Measure dimensions to determine the placement and size of partitions.

Be prepared with the necessary tools and materials, such as glass, partition materials, sealant, screws, etc.

Installation Frame

Install partition frame according to design specifications, ensuring the frame is sturdy, level, and vertical.

- Fixed frame connection points with walls or floors.

Install Glass:

Carefully place the glass into the frame, ensuring the glass surface is protected.

Ensure proper cushioning between glass and frame with rubber pads or blocks.

Fixed Glass

Glass is securely fastened to the frame using screws and strips.

Sealing Treatment:

Sealant is applied at the gaps between the glass and frame to ensure a good seal, preventing leaks and drafts.

Clean-up and Inspection:

Remove debris and stains generated during the installation process.

Inspect installation quality, including whether the glass is flat and secure, and if the seals are intact.

During the actual installation, the following points should be noted:

Ensure the installation environment remains clean and dry.

Handle glass with care to prevent damage during transportation.

Operate strictly according to the installation instructions and safety regulations.

For office partition installations, first measure the office area's dimensions, then set up the metal frame, carefully place the glass into the frame, and securely fasten it with screws. Pay close attention to sealing the gaps with sealant. Similarly, for hotel partition installations, meticulously install the frame and glass to ensure a comfortable and aesthetically pleasing space for guests.