The Automatic Packaging Machine is an intelligent packaging equipment that requires attention to cleaning and maintenance during operation. This issue, the automatic packaging machine manufacturer will introduce how to clean and maintain the automatic packaging machine.

One: Regularly replace the exhaust filter on the vacuum packaging machine. If the vacuum pump's temperature increases significantly, the motor current reaches or exceeds the rated current, or smoke appears at the pump's exhaust port, check if the exhaust filter is clogged. If it is, replace it promptly. Additionally, install an exhaust pressure gauge at the vacuum pump's oil filling hole to inspect for clogging. Replace the exhaust filter when the pressure exceeds 0.6 bar.

Step 2: Clean the suction valve disc of the vacuum packaging machine. When there is a leak in the suction nozzle of the vacuum packaging machine, immerse the suction valve disc inside the nozzle in cleaning solution, then blow it clean with an air compressor to ensure it is inserted into the nozzle cleanly and flatly.

Three, clean the vacuum packaging machine's suction filter mesh. The suction filter mesh should be kept clean to prevent a decrease in suction speed. The suction filter mesh is a filter to prevent larger particles of impurities.