Silicone TubingHigh and low adhesive content varies by product and cannot be generalized. Some say 50% is high, while others argue that 70% is still low. High cost, large shrinkage rate of the adhesive, good elasticity, but not necessarily high hardness, and strength can vary depending on the type of adhesive. What kind of product would require such a high adhesive content? Could it be a high resilience product? High cost, large shrinkage rate, good elasticity, but not necessarily high hardness, and strength can vary depending on the type of adhesive. What kind of product would require such a high adhesive content? Could it be a high resilience product?
Silicone TubeMaterials mainly consisting of NR (Natural Rubber) for shock absorption, if the hardness is only around 40 degrees, a 70% rubber content in other formulas is relatively common. High rubber content: what issues arise depends on the type of rubber: if it's a high viscosity rubber, the fluidity is poor, and the edges are difficult to tear. Both crystalline and non-crystalline rubber with high rubber content are difficult to tear at the edges; one is due to high strength, and the other due to low strength. Since the raw rubber strength of non-crystalline rubber is poor, the higher the rubber content, the lower the relative strength. Of course, when the rubber content is high, the product's shrinkage rate is large, the size stability is poor, the mixing and processing are poor, and the mixing rubber film shrinks severely.
Yongle Rubber & PlasticThe company has successfully passed the ISO9001 certification. Our main products include platinum silicone tubes, peristaltic pump silicone tubes, silicone food molding parts, and silicone products, as well as customized production of sealing components for plastic products. Guided by the competitive strategy of "better products, better service, and a better image," we continuously innovate in management and transform, enhancing our comprehensive corporate competitiveness.
