RRDE-6A ModelRotary Disc ElectrodeIntroduction
Broadly used in chemical power sources; electroplating; metal corrosion; electrochemical intermediates; material researchOxygen Reduction ReactionORR）；Oxygen Extraction ReactionOER）Research and Evaluation of Hydrogen Fuel Cell Catalysts; Lithium-Air Battery ResearchFuel cell catalyst characterization, metal corrosion, and other electrochemical dynamics research areas.With a potentiostatElectrochemical Workstation Coupling (the ring disk electrode must be coupled with a dual galvanostat or an electrochemical workstation with dual galvanostat functionality)
The instrument is connected by an upper motor and motor-driven coupling, with the motor and main shaft being driven by a universal joint. The lower end of the main shaft is fitted with an electrode head, which is threaded to accommodate various electrodes and is held in contact by a spring-loaded pin on the shaft.
The main unit featuresRDE and RRDE dual functionality; operational software; speed can be manually controlled or remotely controlled by an electrochemical workstation.
Features rotating coating state function
Swiss-imported motors, with rotating shaft components that can move vertically, horizontally, and upside down, for convenient coating and finishing of the working electrodes.
RRDE-6A ModelRotary Disc ElectrodeTechnical Specifications
RPM Setting:50-10,000 RPM, Speed Range: 50-8,000 RPM
Stable rotational speed50-1000 RPM, Relative Error <1% ≥1000 RPM, Not more than 50 RPM at 8000 RPM
Cleaning Purification Time: Time Setting:0-499 seconds Time display mode: Local control - decreasing, remote control - increasing
Electrode Tip Radial Jitter≤0.05mm; No axial movement
Results show:1602 Fully Automatic Real-Time Display of Rotation Speed/Oxygen Removal Time
Shaft: Stainless steel, radial跳动 less than 0.05mm
Motor:24V, coreless, MAX low inertia DC servo
Intake Pressure5 psi max
Accuracy Error:<1%@<1000rpm，<0.1%@>2000rpm
Contact Resistance: Less than10Ω; Insulation resistance: greater than 10MΩ
Remote:1V is equivalent to 1000 rpm, with the output voltage directly proportional to the speed.
Remote Level:High-Level Trigger TTL
Dimensions:Dimensions: 210×240×320 Weight: 7.8Kg Power Consumption: ＜25W
Instrument is powered on and rotating.After 30 minutes, continuous use is possible in the following environments:
Ambient Temperature:Operating Temperature: 0~50℃, Relative Humidity: ≤80%, Power Supply: 220V, 50/60 Hz.
Concentric circles, short axis, and no rotating rod designEnsure optimal rotational performance; no eccentricity issues.
RPM Control: Built-in infrared RPM measurement and feedback control deviceGuarantee the actual speed matches the set speed.
Adjustable Height and Angle Motor Bracket: Integrated design, motor height can be freely adjusted on the bracket without disassembly.180-degree rotation for easy electrode removal
Supply gas pipeline connections, dual-tube inflation design, Inflation time and flow rate are set on the machine's panel
