Single-plate dryer bearing cleaning注意事项：
The newly installed wheel hubs are prone to loosening and require frequent inspections.
2. Ensure that all parts of the single board drying machine are functioning normally.
3. The bottom surface of the base for the activity device should be cleaned of dust and other debris to prevent the moving bearing from being unable to move on the base when the machine encounters material that cannot be crushed, thereby avoiding serious accidents.
4. If there is a knocking sound when the gear is in operation, stop immediately for inspection and eliminate the issue.
5. Pay attention to the degree of wear on parts prone to wear, and always ensure timely replacement of worn-out components.
6. The bearing oil temperature of the single board drying machine has increased, and the machine should be stopped immediately for an inspection to identify and eliminate the cause.
How to Clean the Bearing Part of a Single Board Drying Machine? The single board drying machine, or yellow sand drying machine, is a type of drum drying machine. Generally suitable for granular materials, it can also be used to dry sticky paste-like materials or materials with high moisture content by partially mixing them. Especially for drying single boards, the drying effect of Songshan single board drying machines is remarkable. The advantages of the single board drying machine or yellow sand drying machine include high production capacity, wide application range, low flow resistance, a wide operational fluctuation range, and ease of operation.
The shaft of the bearing crusher bears the entire load of the machine, thus, proper lubrication is crucial for the bearing's lifespan, directly affecting the machine's service life and operational efficiency. Therefore, the lubricating oil injected must be clean, and the sealing must be excellent. The main lubrication points of the single board dryer include: (1) the rotating shaft of the single board dryer, (2) roller bearings, (3) all gears, and (4) moving bearings and sliding planes.
