Expanded polystyrene boards possess properties such as moisture resistance, impermeability, light weight, corrosion resistance, low thermal conductivity, high compressive strength, aging resistance, long service life, and low thermal conductivity. The thermal insulation characteristics of expanded polystyrene boards have determined their wide application in the construction industry. To harness  Great energy demands adherence to regulations, and the construction conditions for extruded polystyrene panels are very strict. Specific requirements are as follows:

The foundation walls have passed the acceptance inspection. The door and window frames, as well as various入户 pipelines, water drain brackets, and embedded parts on the walls, have been installed according to the design.

2. The flatness of shear walls is checked using a 2-meter rule.  Large Deviation Exceeds4 hours to apply 20mm thick 1:3 cement砂浆leveling.  Large deviation less than4-inch uneven areas were patched with 1:3 cement mortar to even out the surface.

3. Leveling the masonry walls with 20mm thick 1:3 cement mortar.

The base wall and leveling layer should be dry.

The construction site temperature and wall surface temperature must not be lower than 5℃ within 24 hours after construction, and the wind speed should not exceed 5 levels.

6. Effective measures should be taken to prevent rainwater from washing away the walls during summer construction.