Series of radiators in the field of heat dissipation

LQ-C502

All-purpose Degreasing Powder

Suitable for cleaning the majority of metals; non-corrosive to metals; combines degreasing and wax removal; wide operating temperature range; effectively shortens and simplifies the process flow.

Immersion:40～70 g/L

Ultrasonic35～50 g/L

LQ-01

Acid activation

1. Rapidly remove the surface micro-oxide layer of the nickel coating

2. Easy for subsequent electroplating or chemical plating processes without affecting the appearance and structure of the nickel layer, nor does it compromise the original luster of the nickel coating.

3. Suitable for pre- and post-plating activation treatment for electrochromium, electro-copper plating, and chemical plating, enhancing coating adhesion.

20-25%

LQ-Z100

Galvanized bath

1.AvailableForm a metal film layer with a higher potential on the surface of aluminum and its alloys；

2.With appropriateChemical PlatingCombination of techniques；

3.AvailableA range of decorative or functional electroplating or chemical plating on aluminum and its alloys

Bees'蜜度：30-38

LQ-02

Zinc Phosphate Remover

1.Enhance the quality of double zinc dipping effectively

25%

LQ-N001AK

Environmentally Friendly Nickel Chemical

1. Super-bright, fully environmentally friendly electroless nickel plating without chrome, mercury, lead, cadmium, and other heavy metal components.

2. Meets environmental standards in countries like Europe, the US, Japan, etc., featuring high coating speed, long service life, excellent deep-dipping and dispersion capabilities, and a glossy coating appearance.

Slotting agentLQ-N001AK：6%

LQ-N001B

Environmentally Friendly Nickel Chemical

Notching AgentLQ-N001B：15%

LQ-N001A

Environmentally Friendly Nickel Chemical

Supplement:

LQ-N001A

LQ-N001C

LQ-N001C

Environmentally Friendly Nickel Chemical

LQ-03

Activator

Removes surface oxidation without corroding the nickel surface.

Raw material usage

LQ-N002

Dehydrator

1.Improve water stains on workpieces during drying.

2.Effectively protect and extend the oxidation discoloration of metal surfaces in the air.

3.Will not affect the luster and physical properties of the metal surface.

25-30%

Rosin cleaner

1. It's aWeakAlkaline water-based eco-friendlyTypeCleaner, quickly and effectively removes welders' residuesAfterSolder paste residue, dust, and pad oxidation.

2. Applicable for ultrasonic cleaning process,SoakWashing Process.

3. Effectively removes residue from the tiny gaps beneath components, leaving焊点shiny after cleaning.

Base Material Suitable

Oily rosin cleaner

1. Primarily cleans rosin, solder paste residues, etc.,Widely used in various non-ferrous metals,Copper and aluminum welding joints for heat dissipation equipment

2. When in use, a well-ventilated system must be in place on-site.

3. Avoid open flames.

Raw material applicable

Detergent Remover

1. Suitable for various metals

2. Effectively removes grease from workpiece surfaces, with good emulsifying and penetrating power.

3. Non-corrosive to workpiece base material

4-6%

De-greasing powder

4-6%

Alloy cleaner

5-6%

Alloy Polishing Agent

Repairable surface defects,Remove surface oxides and fine scratches,Enhance the surface luster and quality of the material.

Raw Material Usage

Protectant

The protector has excellent spreading properties.,Rapidly bonds with metal molecules with the aid of special anti-corrosion substances to form protection,Prevent direct contact between metal and air to avoid oxidation reactions.,Achieve long-lasting effectsProtection Effectiveness

Raw Material Usage

Sealer

Sealants enhance the corrosion resistance of both multi-layer and single-layer metallic decorative coatings, with treated coatings experiencing multiple-fold improvements in salt spray resistance and other anti-corrosion capabilities.Enhanced corrosion resistance

Raw Material Usage

LQ-C502

Multi-purpose Oil Removing Powder

Suitable for cleaning the majority of metals; non-corrosive to metals; combines degreasing and wax removal into one; wide temperature range; effectively shortens and simplifies the process flow.

Immersion:40～70 g/L

Ultrasonic35～50 g/L

LQ-C601

Copper Alloy Polish

1.Excellent polishing effect, capable of giving copper surfaces a new look in a short time.

2.Long lifespan with excellent economic benefits.

3.Effectively protects copper surfaces, the polished products are less prone to oxidation and corrosion.

4.No yellow smoke, compliantROHSRequirements.

Raw Material Usage

LQ-C701

Copper alloyActivator

1.Acidic mixed solution, primarily used for the activation of metal ions.

2.Effectively eliminates inhibitor action, easy to adsorb and capture, and enhances the polishing agent's polishing activity.

10%

LQ-C801

Copper Alloys Passivator

1.Antioxidant materials synthesized from a mixture of inorganic and organic substances, free of harmful substances.

2.Biodegradable and environmentally friendly safety features.

3.Excellent antioxidant performance.

20%-30%