Oil-removing Powder LQ-C502

Multi-Purpose Oil Remover Powder LQ-C502

LQ-C502 is suitable for cleaning most metals, non-corrosive to metals, combines oil and wax, has a wide temperature range, and can effectively shorten and simplify the process flow. Brief introduction

Suitable for iron, copper, zinc, aluminum, magnesium, and their alloys.

Wide temperature range, can be effectively cleaned at room temperature, suitable for objects without heat source

Contains special non-toxic solvents, allowing for soft polishing wax and effective cleaning at lower temperatures.

In addition to immersion and degreasing, it can also be used for ultrasonic purification.

In addition to providing excellent results for polishing wax, other metalworking oils can also be thoroughly and effectively cleaned.

Chemical equilibrium superiority, long service life

Product Overview

Product Type: Alkaline Degreasing Powder

Application Method: Immersion; Applicable Range: Iron, copper, zinc, aluminum, magnesium, and their alloys

Equipment:

All equipment in contact with LQ-C502 should be made of stainless steel (316S16 grade) or lined with PVC or PE.

Product Applications:

Concentration: Immersion: 40~70 g/L

Ultrasonic: 35~50 g/L

Temperature: 20-80℃

Time: 2~10 minutes (depending on the oil stain condition)

Safety and Operation

Please read and understand the relevant product safety instructions before using or operating any substances involved in this document.

Stock

Store in a dry room between 4-38°C, avoid contact with incompatible substances listed in the product's safety data sheet. Keep the packaging container sealed when not in use. Please consult our sales and service representatives for more information.

Release

All emissions from this document must comply with national and local regulations. The liquid in the on-site storage tanks may contain other components not provided in the product, and should be tested prior to discharge.

Points to Note

The work environment should have good ventilation systems.

2. Wear masks, gloves, and other protective gear during operation.

3. If accidentally splashed into eyes, rinse with clean water for 15 minutes and seek medical attention immediately.

4. In case of accidental ingestion, rinse with water and seek medical attention.

5. If skin contact occurs, wash with alkaline water and seek medical attention.

6. After use, please wash your hands and gargle with clean water. Replace the lid.