Polyethylene (PE) conduit

PEThe conduit is made primarily from polyethylene resin, with appropriate additives, processed into shape through extrusion. It features corrosion resistance, impact resistance, aging resistance, high strength, ease of bending, and convenient construction.peConduit tube is a rigid plastic pipe used for corrosion resistance, electrical leakage prevention, and wiring. The epoxy coated layer of the conduit tube more effectively addresses the corrosion of metal pipes due to water conveyance, burial, and exposure to acids, alkalis, and salts, with a service life of up to50Over 1 year.

Features of the PE conduit:

1It offers excellent rigidity, strength, and flexibility. It can be connected using sleeves or heat-fused joints.

2Corrosion-resistant and long-lasting.(Buried pipe lifespan exceeds fifty years)，。

3Good tensile and flexibility properties.PEPipe material is a high-tensile pipe with a elongation at break exceeding500%Highly adaptable to uneven ground settlement and misalignment.

4Wall smooth, low friction coefficient, easy to pull through cables, high construction efficiency, and low construction cost.

5Excellent electrical insulation properties, durable, and ensures safe and reliable operation of the circuit.

6Lightweight, easy to maintain, install, operate, and transport.

7Small-diameter pipe materials can be supplied in coil form, featuring longer pipe sections, fewer joints, and easy installation.

8Tubing can be made in various colors for easy distinction.

9Excellent low-temperature impact resistance.PEThe低温脆化temperature is very low, can-20～60℃Safe for use within the temperature range. During winter construction, due to the excellent impact resistance of the material, there will be no cracking of the pipes.

10Excellent wear resistance.PECompared to other metal pipe materials, the metal pipe offers superior wear resistance.4Not available in Chinese content provided.

11A variety of innovative construction methods.PEIn addition to traditional excavation methods, various innovative non-excavation techniques can be employed for construction, such as jacking, lining, and bursting methods. These are the preferred choices for locations where excavation is not permitted.

Advantages of Polyethylene (PE) Conduit:

1Excellent wear resistance, long service life with good aging resistance; Polyethylene is an insulator for electricity, thus it does not rot, rust, or experience electrochemical corrosion.

2Superior mechanical properties are reflected in high compressive strength and high elongation rate. The material is made of high-density polyethylene.

3Easy to install, with connection methods including hot melt and electric melt, offering high efficiency and cost savings.

4Stability in processing performance is determined by high and low-temperature-resistant materials, offering stable characteristics, reasonable pricing, flexibility, and excellent insulation properties.

The application range of the PE conduit:

For normal indoor environments and locations with high temperatures, dust, vibration, and fire hazards. Also suitable for use in damp areas. Not to be used in particularly damp, acidic, alkaline, corrosive, or explosive environments. Operating temperature range:-15℃～+40℃Excellent mechanical properties of the conduit. Superior corrosion resistance, with high pressure resistance and working pressure exceeding2.5MpaThe conduit surface is smooth with low fluid resistance, non-scaling, and not conducive to microbial growth. It has a small coefficient of thermal expansion, preventing shrinkage and deformation. Traditional installation and connection methods are used. The epoxy powder coating on the conduit provides an even more effective solution to corrosion from water transportation, burial, and acids, alkalis, and salts, with a service life that can reach50Over one year.

CAUTIONS FOR POLYETHYLENE (PE) CONDUCTOR SLEEVES

1Of course, it's important to use conduit for wiring.

2The circuit routing should be handled“Close-proximity wiring between both ends”No unauthorized rerouting is allowed, as it not only leads to deadlines but also increases the investment in electrical modifications.

3Do not run too many wires through a conduit; after threading, always pull them to check if they can be easily moved.

4Wiring connections must have concealed junction boxes with cover panels for easy replacement and maintenance in the future.

5Pipe diameter less than25No Chinese content provided.PVCConduit TubeBend applications should use a bend reducer; do not bend with elbows, as sharp angle dead bends often lead to dead lines.