PVC Conduit Tube

PEPVC conduit is made primarily from polyethylene resin, enhanced with appropriate additives, and formed through extrusion processing. It boasts features such as corrosion resistance, impact resistance, aging resistance, high strength, ease of bending, and convenient installation.peConduit tube is a rigid plastic hose, used for corrosion resistance, electrical leakage prevention, and for passing wires. The epoxy coated plastic layer of the conduit tube more effectively addresses the corrosion issues caused by water transportation, burial, and acidic, alkaline, and saline substances on metal pipes, with a service life of50More than one year.

Features of Polyethylene (PE) Conduit:

1It offers excellent rigidity, strength, and flexibility. It can be connected using sleeves or by heat-fused bonding.

2Corrosion-resistant and long-lasting.(Soil-buried pipe lifespan over 50 years)，。

3Good toughness and flexibility.PEPipe material is a high-tensile pipe with a elongation at break exceeding500%Highly adaptable to uneven ground settlement and misalignment.

4Wall smooth, low friction coefficient, easy to pull through cables, high construction efficiency, and low construction cost.

5Excellent electrical insulation performance, durable, and ensures safe and reliable operation of the lines.

6Lightweight, easy to maintain, install, and operate, and convenient for transportation.

7Small diameter pipes can be supplied in coil form, featuring longer pipe sections, fewer joints, and easy installation.

8Tubing can be manufactured in various colors for easy identification.

9Excellent low-temperature impact resistance.PEThe low-temperature embrittlement temperature is very low, it can-20～60℃Safe for use within the temperature range. During winter construction, the material's good impact resistance prevents pipe cracking.

10Excellent wear resistance.PECompared to other metal pipe materials, the wear resistance of metal pipes is4Please provide the Chinese content to be translated.

11A variety of new construction methods.PEIn addition to traditional excavation methods, various new trenchless technologies can be employed, such as jacking, lining, and pipe bursting. These are the preferred choices for locations where excavation is not permitted.

Advantages of PE conduit:

1Excellent wear resistance and long service life; polyethylene is an electrical insulator, thus it does not rot, rust, or undergo electrochemical corrosion.

2Superior mechanical properties are reflected in high compressive strength and high elongation rate. The material is made of high-density polyethylene.

3Convenient for installation, featuring thermal and electrical melting connections for high efficiency and cost savings.

4Processing performance stability is determined by high and low temperature-resistant materials. It offers stable performance, reasonable pricing, is bendable, and has excellent insulation properties.

The application scope of the PE conduit:

For normal indoor environments, as well as in high-temperature, dusty, vibrating, and fire-hazardous areas. Suitable for use in humid locations. Not to be used in particularly humid, acidic, alkaline, corrosive, or explosive environments. Operating temperature range:-15℃～+40℃Excellent mechanical properties of conduit. Superior corrosion resistance, high pressure-bearing strength, and working pressure exceeding2.5MpaThe conduit surface is smooth with low fluid resistance, non-scaling, and not conducive to the growth of microorganisms. It has a low coefficient of thermal expansion, preventing shrinkage and deformation. Traditional installation and connection methods are employed. The epoxy powder-coated layer of the conduit provides more effective protection against corrosion from water transportation, burial, and acids, alkalis, and salts, with a service life up to50Over one year.

Caution for PE Wire Conduit Usage:

1Of course, it's important to use conduit for wiring.

2The circuit wiring should be handled properly.“Close proximity wiring between ends”No unnecessary detours allowed, as this not only leads to deadlines but also increases the investment in electrical modifications.

3Do not put too many wires into a conduit; after threading, give them a pull to ensure they can be easily moved.

4Junctions must have concealed boxes and panels at the connection points for easy replacement and maintenance in the future.

5Pipe diameter less than25No Chinese content provided.PVCConduitElbow applications require an elbow bender; do not bend with elbows, as a 90-degree dead bend often results in a dead line.