Bottling capping machines are widely used in the market, and their time-saving features have been well-recognized. Many companies now opt for these machines due to their simplicity and high precision. However, the traditional mechanical friction plates on these machines tend to be too tight or too loose during the capping process, which is a significant issue for manufacturers. How can the problem of the capping machine being too tight or too loose during the capping process be resolved?
Adjustment Method for Capping Machine: Tight or Loose Seating of Caps
Ensure the旋盖机power cord is properly connected to the power box.
Connect the power, the power box indicator light is on.
3. Left hand holding the cap over the bottle opening.
4. Hold the bottle with the rotating cap with your left hand.
5. Tightly grip the cap turning machine with your right hand, aligning the head vertically with the bottle cap.
6. Press the start button on the filling machine with your right index finger, and push down simultaneously until the clutch of the filling machine engages automatically, emitting a "click-click..." sound. The cap head does not need to be pressed too tightly depending on the tightness of the cap.
7. Adjusting the tightness of the bottle cap can be achieved by adjusting the nut between the head and the machine. Tightening it requires a greater torque, making the cap tighter; loosening the nut results in less torque, making the cap looser.
