Water treatment encompasses two main categories: wastewater treatment and drinking water treatment. In some areas, wastewater treatment is further divided into two types: wastewater treatment and reclaimed water reuse. These are commonly used.
Our water treatment chemicals include: polyaluminum chloride, polyaluminum chloride ferric, basic aluminum chloride, polyacrylamide, activated carbon, and various filter materials, etc. The effectiveness of water treatment can be...
The process of treating raw water (source water) to meet quality standards for finished water (potable water, process water, or effluent water).
The purpose of water treatment is to enhance water quality to meet certain standards. Depending on the method of treatment, there are various types, including physical water treatment, chemical water treatment, and biological water treatment.
There are two major categories based on the treatment object or purpose: water treatment and wastewater treatment. Water treatment includes two types: potable water treatment and industrial water treatment; wastewater treatment
There are distinctions between domestic wastewater treatment and industrial wastewater treatment. Among them, boiler feed water treatment, which falls under the category of industrial water treatment, is particularly closely related to thermal engineering technology.
Supply water treatment, main condensate treatment for steam turbines, and recirculating water treatment, etc.
Common Operation Process of Water Treatment Equipment:
Preparation Phase
Operations must be performed by a team of two or more, with a primary supervisor overseeing and a secondary operator executing.
Harbin Water Treatment Co., Ltd. reminds you to first check the main and auxiliary equipment of the unit to be started, oil tank oil level, water level in the water intake well, valves of the inlet and outlet water pipes, and motor wiring.
Ensure that ground wires, DCS systems, and system power quality parameters are thoroughly inspected. Confirm accuracy and report to the on-duty dispatcher before awaiting further instructions.
Harbin Water Treatment Company
Step-up Operations
Upon receiving the startup command, promptly initiate the equipment with the designated machine number.
2. After starting the equipment, inspect the bearing temperature, sound, and vibration of all main and auxiliary equipment, oil level in the oil tank, water level in the sump, pump outlet pressure, trunk line pressure.
Motor current, pipeline valves for in and out water, and DCS system parameters have reached normal levels.
During the startup process, if any anomalies are detected, the machine should be immediately shut down for inspection and the on-duty dispatcher should be reported to.
4. Strictly comply with dispatch orders; no equipment may be stopped or put into operation without dispatch permission.
5. After the equipment is started, report to the duty dispatcher and carefully fill out the operation records.
Section 3: Shutdown Procedures
Upon receiving the dispatch order, promptly shutdown the machine with the specified ID.
2. After shutdown, inspect all main and auxiliary equipment of the unit, oil tank level, water well water level, valves of incoming and outgoing pipelines, for leaks, and whether the pumps are running in reverse. Address any anomalies promptly.
No Chinese content provided.
3. After shutdown, report to the duty dispatcher and meticulously fill out the operational records.
