Dust Suppressant, also known as Dust Binder, is an eco-friendly product that replaces dust control nets and provides long-lasting control over dust from coal storage and transportation in power plants, ports, and mining areas. It has been successfully applied to control dust pollution from various sources such as power plants, ports, coal storage and transportation in mining areas, as well as for the prevention and control of sand dust pollution in tailing ponds, desertification regions, and for dust control on construction sites and roads.

Features:
· Simple construction methods, widely applicable, suitable for large loess areas and limited spaces alike
· The product forms a film quickly after spraying, with rapid results
· Excellent dense film layer, no dusting even under strong wind after film formation
· Non-toxic to the environment; post-spraying does not affect the regrowth of plants or the secondary use of the powdered material.
The product is a milky white powder, which becomes colorless after dilution and spraying.
· Low cost, one-time coating, long-lasting, no need for extensive rework
· Excellent UV resistance
· After 24 hours of spraying, rain or snow will not affect the film layer

Cautionary Notes:
Store in a cool, dark place, sealed.
(2) Ensure thorough mixing with water during the dilution process, and apply sufficient spray during application to guarantee effectiveness.
(3) Adjustments can be made during use. Therefore, on-site planning and design should be conducted prior to processing to ensure satisfactory results.

Instructions for Use
Dust Suppressor Dilution:
① Small Spraying Equipment: First, pour the dust suppressant concentrate in the required amount into the spraying container at a ratio of 1:1000, then add water proportionally. Stir well after mixing, or mix while adding water until the solution is thoroughly saturated for spraying.
② Large Spray Equipment: First, fill the water tank of the sprinkler truck with half of its capacity of clean water. Then, add the required biological dust suppressant at a dilution ratio (concentrate:water = 1:1000). Finally, add the remaining half of the water, mix thoroughly, and it is ready for saturation spraying.
Our company, in collaboration with the Institute of Geoenvironment and Ecological Science and Technology of the General Administration of Coal Geology of China and Ocean University of China, continuously innovates and develops new eco-friendly products. Welcome to call for inquiries, and we offer online quotations.