Enhanced Injection Pump

5-inch high-definition touch LCD screen, with an aesthetically pleasing interface and easy operation, displaying real-time operating parameters and status. Ultra-high travel resolution, with very low pulsation, ensuring smoother operation.

Model and Specifications:

7011U Single Channel

Category:

Enhanced

ØOperation Mode: Injection

ØSyringe Selection: Includes three brand-name syringes, supports custom syringe options.

ØCalibration Function: Supports syringe calibration and stores syringe parameters

ØPower-off Memory: Retains current operating parameters during power failure and continues operation upon power restoration.

ØOnline Adjustment: Current flow rate can be adjusted during operation

ØTip Function: Real-time display of current maximum/minimum flow rate, dynamic display of related operating parameters

ØReminder Function: Target liquid level operation, audio alarm alert

ØInjection Molding Force Setting: Appropriate force can be set according to the specifications of the syringe.

ØExternal Control: External control signal (5)～24V, for start/stop control

ØRS485/USB: Address adjustable and displayed on screen, baud rate 1200～9600 bps

ØStatus Outputs: Start/Stop, Direction, Alarm

UltimateTravel: 140mm

ØTravel Resolution: 0.025 um/μstep

ØLine speed range: 0.08 um/min - 160 mm/min

ØLinear Thrust: 160N

ØApplicable syringe specifications: 0.5ul-60ml

ØApplicable Power Supply: AC 90-264V, 50-60Hz

ØWork Environment: Temperature: 0-40℃; Humidity: 20%-85% RH, No Condensation

ØProtection Level: IP31

ØDimensions: 210x240x145 mm