High-density cabinets are mainly composed of tracks, bases, columns (plate-style), shelves, hanging plates, side panels, back panels, top panels, dustproof panels, protective plates, door panels, transmission mechanisms, anti-tipping, shockproof, dustproof, rodent-proof, braking, cushioning, catalog cards, and transmission devices, as well as sealing devices.

Composition:

High-density storage cabinet

High-density storage cabinets

(1) The track includes ground track and guide track.

(2) The structure includes columns, mounting panels, shelves, partition bars, and dustproof panels.

Pillar: The vertical column that supports the entire structure.

Shelf Bracket: Placed between shelves for support and stabilization purposes.

Shelving: A flat panel for storing documents and files.

Separator bar: Used to separate documents stored on both sides, preventing chaos.

Dust Shield: Placed at the top of the frame, primarily used for dust prevention.

(3) The transmission system includes: chains, gears, handwheels, bearings, rollers, and locks.

The main shaft and bearing have a diameter of φ20mm. Made of 45# steel manganese material from Factory 5 according to GB3882-87, equipped with a Z390504 mounted spherical bearing. The short shaft tube is connected for transmission, featuring reliable center straightness, smooth, lightweight, and natural movement of the frame.

(4) Chassis: Primarily used as the base for supporting the structure.

(5) Sealing Device: Prevents damage caused by impact during the closing of the密集柜, and also reduces the noise produced by the opening and closing of the racks. It serves as a collision, dust, moisture, noise, and rodent protector.

Panel: Includes inner panel, outer panel, and door panel.

(7) Top Panel: The top of the dense cabinet frame. Each storage compartment is equipped with a dust-proof device to prevent dust from falling into the cabinet interior, as well as a reverse-preventing device on the top and bottom frames. Each movable single-sided cabinet top is fitted with a reverse-preventing device.

(8) Catalog Cards: Located on the side panels of the cabinet, used for placing cards with categorized information.

(9) Anti-Tip Device: Installed on the track, used to stabilize the compact storage cabinet and prevent it from toppling over.