Steel-lined plastic chemical equipment and storage tanks are indispensable and important basic equipment for industries such as petrochemicals, grain and oil, food, fire protection, transportation, metallurgy, and more. They are always a vital part of our economic life.

Can't do without various sizes of anti-corrosion storage tanks, chemical storage tanks; their crucial role in the national economic development is irreplaceable. The products are widely applicable to the chemical, biological, dye, metallurgical, and other industries.

Rare earths, machinery, electricity, electronics, environmental protection, textiles, brewing, food, aviation, water supply, and drainage industries.
Safety Precautions for Steel Lined Plastic Chemical Equipment:
1. Corrosion-proof storage tanks should be equipped with anti-static devices when storing high-resistance organic solvents.
2. Corrosion-resistant storage tanks should be prevented from experiencing violent impacts and bumps during the equipment process.
3. Full plastic flanges, being softer than steel plates, require users to inspect the sealing function of the storage tank equipment before use. A liquid test can be conducted to check for leaks. Storage tanks (vessels) for containing chemical liquids.

First, test for leaks with water to prevent any loss.
4. The anti-corrosion storage tanks are at normal temperature and pressure. The steel-plastic composite storage tanks are used at temperatures ranging from -40℃ to 98℃, while the polyethylene full plastic storage tanks are used at temperatures from -40℃ to 60℃.
5. Tanks (storage tanks) should be clearly marked with the stored substances when storing chemicals. There should be a drainage trench and dilution equipment near the location where the tanks are placed.
6. It is necessary to open the vent on the equipment for filling and output to prevent damage due to pressure.
7. Equipment should be used in an environment far from the source of vibration and should be kept away from open flames.
8. Any pipes with joints or flanges at the bottom of the storage tank (storage tank) should be perpendicular to the barrel wall. Use flexible connections to prevent uneven expansion of the barrel wall from top to bottom after the tank is filled with liquid, which could lead to damage to the joints.

Causes leakage, and in severe cases, damages the joints and drum.
9. When the liquid inlet is positioned higher from the tank bottom, the inlet should be bent towards the tank wall to allow the liquid to flow down along the wall, reducing the impact on the bottom.
10. Pipe connections and accessories that interface with equipment should prevent their weight from directly acting on the equipment. During hoisting, receiving points and manholes on the equipment must not be used as anchor points.
11. Select anti-acid gaskets for sealing on the equipment and replace them promptly.
12. Equipment equipment, application, and protection should comply with national regulations as required.