Detailed Introduction to the Server Room Metal Panel

To install the server room metal wall panels directly onto the wall, a frame must first be set up, followed by the hanging of the panels. During actual installation, if the conditions of the interior wall do not permit the use of light steel frame skeletons, the metal wall panels can be installed directly onto the rough interior wall surface. However, the rough wall must meet the design requirements for surface flatness and the wall skin must have sufficient strength to bond the panels securely, ensuring that the wall skin does not peel off.

The server room metal panels are meticulously crafted from rust-proof hot-dip galvanized steel sheets with a surface thickness of 0.6mm to 1.2mm, or painted steel sheets. The panels are lined with 12mm thick gypsum interior boards. The surface of the metal panels is coated using an automatic high-pressure electrostatic ultra-high-speed rotating fog spraying technique, ensuring a paint film thickness of over 20 micrometers. This guarantees a smooth and flat surface, anti-dust, color consistency, fire and electric resistance, heat insulation, noise reduction, anti-magnetic interference, acid and alkali corrosion resistance, strong antioxidant capacity, and shock resistance, making the server room metal panels significantly more aesthetically pleasing, safe, and functional compared to conventional counterparts. Additionally, the panels feature a U-shaped edge design, which facilitates professional installation and fastening processes between adjacent server room noise-insulating removable panels. The sleek and fashionable appearance is achieved by using strips to seal and secure the joint gaps, resulting in a seamless connection between server room panels. Furthermore, the metal panels' electrical insulation properties are highly anticipated. The surface coating contains sufficient anti-conductive materials, allowing for adjustable control of the wall's electrical conductivity coefficient. It effectively dissipates static electricity, with the high-tech surface resistance value controlled within the range of 10^5 to 10^8 ohms, ensuring a charge decay time of less than 1 second, thus guaranteeing the anti-static performance of the server room metal panels and providing a safe and reliable barrier for users.