I. Basic Structure of the Roller

The drum roller of the belt conveyor is composed of drum tube, bearing housing, bearings, seals, and bearing caps, etc. Among them, the drum tube serves as the carrier for the inner race of the rolling bearing, while the bearing housing is for

Outer races for roller bearings, and bearing caps are used for sealing and protecting the bearings. Sealing rings serve to prevent dust, rain, and other debris from entering the interior of the drum, thereby affecting...

Ensure the normal operation of the rolling bearing.

2. Drum Function and Features

The drum, as an integral part of the belt conveyor, is mainly used for transmitting the belt. Its maximum speed and load are all borne by the drum. Its features include a simple structure and ease of maintenance.

Maintenance and installation.

Section 3: Drum Maintenance and Care

To ensure the roller operates normally, regular maintenance should be conducted. The specific steps are as follows:

1. Regularly clean the roller to remove any buildup on its surface.

2. The drum should be lubricated with a certain amount of grease internally to ensure smooth operation and effectively extend the service life of the rolling bearing.

3. The roller seal should be regularly checked for damage or wear, and replaced promptly if any issues are found.

4. Regularly inspect the bearing housing for looseness, cracks, or deformation issues.

In summary, as the core component of the transmission system, the conveyor belt roller not only enhances transmission efficiency but also requires our careful maintenance and upkeep.