Road surface shot blasting machine in daily application:(1) Surface roughening and cleaning during road surface layingDuring road surface treatment, using a road shot blasting machine or a floor-mounted shot blasting machine for preliminary surface preparation can significantly increase the surface roughness, enhancing the durability of the slurry dust seal's structure. Shot blasting treatment before applying a resin material overlay can greatly increase the bonding strength between the resin overlay and the original sub-base.(2) Removal of tire marks from the runwayHigh-speed takeoff and landing aircraft leave tire marks on the runway, which can affect the safety of takeoff and landing. By using a road surface shot blasting machine to move the blasting equipment across the apron, the cleaning speed and depth can be adjusted according to the runway's condition. The cleaned surface is very neat and aesthetically pleasing. Particularly, winter construction is not affected.(3) Clean steel plate surfaces, ship decks, steel girder bridge decks, and oil drilling platforms.The road mobile shot blasting machine can be used to remove scale, rust, and roughen the surfaces of ship decks, steel box girder bridges, oil drilling platforms, chemical oil tanks, internal ship surfaces, and steel plates. It achieves a roughness level of Sa2.5-3.0, fully meeting the pre-treatment requirements for anti-corrosion or heavy-duty anti-corrosion coatings.