Road Surface Shot Blasting Machine: Daily ApplicationsSurface roughening and cleaning during road pavingDuring road surface treatment, using a road shot blasting machine and a floor-mounted shot blasting machine for pre-treatment can significantly increase the surface roughness, enhancing the durability of the slurry dust seal's structure. Shot blasting the surface before applying a resin material coating can greatly improve the bond strength between the resin coating and the original sub-base.(2) Removing Tire Marks from RunwaysHigh-speed takeoffs and landings by aircraft leave tire marks on the runway, which can affect the safety of takeoffs and landings. By using a road blasting machine to move the blasting equipment across the ground, the cleaning speed and depth can be adjusted according to the runway's condition. The cleaned surface is very neat and aesthetically pleasing. This is especially true for winter construction without any impact.(3) Clean steel plate surfaces, ship decks, steel girder bridge decks, and oil drilling platforms.The road surface shot blasting machine and mobile shot blasting machine can remove scale, rust, and provide roughening treatment on ship decks, steel box girder bridge decks, oil drilling platforms, chemical oil tanks, internal ship surfaces, and steel plate surfaces. The roughness level is Sa2.5-3.0, fully meeting the pre-treatment requirements for anti-corrosion or heavy-duty anti-corrosion coatings.