Fully Automatic Plastic Heat Forming Machine
Internal structure analysis diagram
Product Illustration
Material dispensing mechanism
Feeding Mechanism
Heating Furnace Mechanism
Stretching Mechanism
Hydraulic system components
Workbench mechanism
Key Technical Parameters Main Technical Data
| Parameters | Content |
| Parameters | Contents |
| Material-compatible Material | PP、PE、PS、PVC、PET、ABS、HIPSBiodegradable materials |
| (degraded material)Wait | |
| Applicable sheet thickness | 0.3-2.0㎜ |
| Sheet thickness | |
| Applicable sheet width | 540-660㎜ |
| Sheet width | |
| Large mold specification | 750×350mm |
| Max forming area | |
| Large molding depth | 150㎜ |
| Max forming depth | |
| Work Efficiency | ≤25Model/Minute |
| Work efficiency | ≤25 strokes/min |
| Rated Heating Power | 50kw |
| Heating rated power | |
| Main motor power | 11kw/4Extremely |
| Main motor power | |
| Use power | 380V/50Hz(3-Phase, 4-Wire) |
| Power supply | |
| Utilize pneumatic pressure | 0.6-0.8Mpa |
| Voltage | |
| Gas consumption | 2500～3500L/min |
| Air volume required | |
| Water Consumption | 40～45L/min |
| Water volume required | |
| Overall Weight | about 4.5T |
| Machine weight |
Two,Features Feature
1The mold installation workbench utilizes a four-column guided positioning system, which ensures stability and balance. Below the mold, a multi-point lever principle is employed, using a five-point thrust mechanism to elevate and lower the workbench, facilitating smooth up and down movement of the mold.
2The mold platform lifting is accomplished by a servo mechanism, with each action's operation distributed as follows: rising, forming, cutting, descending, and demolding.
Gty tyh
Ucvy”H:
3．The heating oven is divided into upper and lower chambers, each chamber separated8Zone, temperature controller achievesPIDAutomatic temperature control adjustment, temperature control error <1.5℃。
4The heater employs an embedded ceramic far-infrared radiation component, offering high thermal efficiency and safety.
5The film feeding section utilizes servo motor conveyance, ensuring precise and stable feeding length. The conveyor chain track is equipped with an internally concealed cooling water system, boasting high cooling efficiency. It saves water resources, with the inner cover made of stainless steel and the guide chain track made of die steel.38crMulvManufacturing, surface nitriding, high working surface hardness, long lifespan
6Control system utilizesPLCTouchscreen human-machine interface operation, low center of gravity design, low cup dispensing height, smooth operation, suitable for human standing operation and observation height.
8. The airway control sections are all equipped with imported valves.MACIn the U.S., it boasts high working precision and long lifespan, strong responsiveness, and ensures stable operation of the machine under high-frequency operation.
