Steel-lined plastic storage tank

The steel-lined plastic dilution tanks have excellent corrosion resistance, which is suitable for non-oxidizing acids (such as hydrochloric acid, dilute sulfuric acid, hydrogen fluoride acid), dilute nitric acid, alkalis, and salt solutions. The steel-lined plastic dilution tank is made by welding a steel mesh (tortoise shell) onto the surface of the steel body. It uses pure polyethylene (linear low-density polyethylene LLDPE, high-density polyethylene HDPE) as raw material and combines the steel plate, steel mesh (tortoise shell), and polyethylene into one through the rotomolding process. The polyethylene is firmly adhered to the surface of the steel body. The product features include seamless joints, no leakage, non-toxicity, resistance to aging and impact, corrosion resistance, long service life, and compliance with hygiene standards. Steel-lined plastic dilution tank ordering instructions: 1. The operating temperature of the steel-lined plastic storage tank is typically 70-80°C, with a maximum temperature of up to 90-100°C. 2. The current volume of our steel-lined plastic storage tanks (based on road transportation limits) ranges from 1 to 150 cubic meters. They are available in vertical and horizontal configurations. 3. The thickness of the outer steel tank body of the steel-lined plastic storage tank can be determined by the specific gravity of the medium being stored, with the inner plastic lining (polyethylene) thickness generally between 15-18mm. 4. The inner plastic lining material of the steel-lined plastic storage tank is polyethylene (PE), so it cannot contain chemicals that are not resistant to polyethylene (PE), such as benzene, ethers, ketones, esters, etc. 5. Our steel-lined plastic storage tanks are factory-finished with a simple anti-rust paint for corrosion prevention.