What methods are there for steel formwork installation?

High safety requirements for steel formwork suspension methods: Under the steel formwork system, it is suspended below the underlift truss system of the lifting channel, with a suspension height exceeding 10 meters. How to suspend the steel formwork, ensure the force balance of the suspension system, and plan the吊points are critical considerations in the planning process of the suspended steel formwork system.

High requirements for steel formwork turnover: According to the climbing channel and elevation plan, the central cylinder wall requires approximately 98 pours. Such a high turnover frequency imposes stringent demands on the panel of the steel formwork system. With the tight project timeline, replacing the steel formwork system panels halfway through would affect the schedule, hence selecting a reusable steel formwork panel is crucial for the formwork selection. Variable structural cross-sections and mold planning: The central cylinder cross-section of this project undergoes five modifications, accompanied by a reduction in wall thickness, thereby presenting numerous difficulties for the mold planning of the steel formwork system. Significant changes in floor height and steel formwork height planning: The project has up to 36 variations in floor height, with 4.7 meters being the standard floor height. Many floors exceed 4.7 meters according to the design outline, posing numerous challenges for the steel formwork height planning.