Manufacturers Discuss Several Protection Methods for Wulian Red Stone. Generally, when Wulian Red stone is produced according to standards, the protection issue is resolved during factory production or on-site construction. However, some require special emphasis. This is because stone, as a natural mineral, varies greatly in types and compositions, resulting in various specific protection details for each type. Here are some examples.

Five-Luan Red Stone Protection Methods for Wet-Laid Floors or Walls: For wet-laid floors, it is crucial to prevent the seepage of cement mortar and water-based pollution from daily use. Choose stone penetrating protective agents and apply two or more layers of overlapping protection on all six sides, especially adding a protective interface agent for the stone base to enhance the bond between the stone and cement mortar. Water-based protective agents should not be used, especially for stones that have been acid-washed and bleached, as this can lead to difficult-to-remove rusting and yellowing. For wet-laid floors on outdoor squares, it is necessary to prevent cement pollution during construction and water-based efflorescence and oil stains in the future, and it should facilitate daily cleaning.

Choose silicone-oxygen water-based protective agent or multi-water-based protective agents: Provide six-sided protectionWater-based protective agents should also be applied to the joints of paved cement to prevent the rain from dissolving the cement and causing efflorescence. Protection for Hole Stone Tiles: These tiles have inherent voids, absorb water easily, and are prone to staining, which is difficult to clean. To reduce water absorption of the tiles, prevent contamination and aging, and address issues such as efflorescence, water leakage, and discoloration caused by freeze-thaw and wet-dry cycles, surface protection should be applied followed by a base-type protective agent. It is important to seal the holes, which can be done using epoxy or acrylic resin sealants.

Protecting Sandstone and Wood Grain Stone: This variety of five-lan red stone features abundant capillary pores and severe capillary action, which can easily lead to contamination during installation. To prevent pollution, a decorative water-based protective agent can be applied to the five-lan red stone during use, followed by a decorative fluoro-silicone oil-resistant protective agent for additional surface protection, significantly enhancing the protective effect. For wet-laid stone, it is advisable to apply a sealing stone base protective agent for added protection.