Specs and Parameters: (Customizable according to customer requirements)
Key Performance Advantages: Baking Large Items
Inner Diameter: Customized according to product dimensions
Inner Material: Stainless Steel, Carbon Steel, Galvanized Plate, Cold Rolled Steel
Outer Material: Cold-rolled steel plate or stainless steel plate, surface coated (optional colors, baked paint, hammer texture paint, matte paint, electrostatic powder coating)
Frame: Channel steel angle steel complete frame
Thermal Insulation Material: High-temperature-resistant silica-alumina wool
Bottom Load-bearing: Channel Frame
Support Foot: Fixed with channel steel, flat bottom, or I-beam or channel steel track.
Heating Tube Material: Stainless steel or carbon steel electric heating tube, suitable for continuous use up to 70,000-80,000 hours.
Heating tube distribution: Evenly distributed on both sides of the cabinet air ducts, and at the top air duct
Air Distribution: Horizontal twin duct air supply or twin duct high-pressure circulation air supply
Blower Motor: High-temperature-resistant motor with longer shaft and multi-blade impeller
Motor Installation: Top, Side
Door Latch: Alloy bearing hinge and top/bottom buckle-style pull rod
Factory Accessories:
1. Compact car grille hooks
2. Product Manual
3. After-Sales Maintenance Warranty Card
Certificate of Product Compliance
5. Comprehensive Tool Kit
Performance Advantages: (Ongoing Improvement)
Blower SystemOptimized air duct design with a more heat-resistant fan motor and centrifugal fan blades, featuring powerful turbine-style air circulation to avoid dead corners. This ensures more even hot air distribution inside the cabinet, leading to greater energy efficiency and quieter operation. It provides an excellent operating environment, with wind speed and pressure meeting test standards and complying with domestic environmental protection requirements. Some components offer high reliability and compatibility, and are easy to install, maintain, and repair.
Heating SystemUtilizing far-infrared heating, it boasts high radiation efficiency and faster heating speeds. The heating tubes are evenly distributed, ensuring the system is completely independent, without affecting the control circuitry. Both temperature control and power are calculated by the computer, automatically adjusting the heating output power based on the internal temperature to meet high-precision power demands. This not only enhances environmental protection but also promotes energy savings.
Temperature Control SystemUtilizing a microcomputer digital display intelligent temperature controller with PID adjustment, featuring a digital timer relay, high accuracy, and clear visibility. When paired with a solid-state relay, it offers continuous adjustment capabilities. Once the temperature reaches the preset value, the relay accepts the temperature controller's output signal to regulate the temperature, ensuring it remains within the PID temperature range with precise fluctuations for constant temperature action. This improves the accuracy of the internal temperature. The circuit is equipped with an over-temperature protector, which immediately cuts off the control power in case of instrument failure or operational errors leading to temperature exceeding the set value, ensuring the safety of the products inside. The over-temperature protector can be adjusted within the approved range.
Insulation EffectivenessExcellent thermal insulation technology, significant sealing effect, the exterior of the box maintains the normal indoor temperature, with minimal impact on the ambient temperature.
System ProtectionLeakage protection, circuit protection, short-circuit protection, overload protection, over-temperature protection.
Electrical configuration: (Customizable according to customer requirements)
Temperature Controller:A set of intelligent digital temperature controller for automatic temperature control, with a control accuracy of 0.1-1 degree and PID adjustment.
Time Setting Device:HS48S-99.99 Timer Device, featuring manual/automatic on/off capabilities. Starts timing when the temperature reaches the set value, and cuts off the heating power supply once the set range is achieved.
Time alarm device:APT/AD16 type sound and light alarm device, alarms immediately upon completion of set time, with manual shutdown alarm prompt.
Over-temperature alarm device:When the temperature exceeds the set value range by a certain degree, the protector immediately cuts off the control power supply.
Thermometer Device:A stainless steel PT100 platinum resistance temperature sensor for precise temperature measurement, and a stainless steel K-type platinum resistance temperature sensor for use with over-temperature protectors.
Circuit breaker activation:Circuit breakers with leakage protection for starting power, effectively protecting certain electrical components.
Contactor:PID+SSR (optional) output, precise temperature control accuracy, enhancing the stability of the temperature control components and interfaces, and extending their service life, ensuring uniformity of the internal temperature.
Current Voltage:220/380V, 50Hz, two-phase/three-phase four-wire with properly connected ground wire.
Switches and indicator lights:Utilize Chint brand for durability; available to use as per customer's request or a specific brand.
Recorder:With or without paper recorder and USB, microcomputer integrated control system: available for customer selection.
Equipment Operating Environment: (Please Note)
Installation Site:Level ground, good ventilation, no severe vibrations around equipment, no safety hazards, no strong magnetic fields nearby, no direct sunlight or other heat sources radiating directly, no high concentration of dust or corrosive, flammable, and explosive materials. Adequate space for usage and maintenance is required around the equipment.
Utilize pneumatic pressure:86-106Kpa
Environmental Requirements:Temperature range: -5 to 40 degrees Celsius, relative humidity ±85% RH.
Power Source Used:Customers are required to install a corresponding air or power switch of the appropriate capacity for this equipment, and properly connect the grounding wire.
After-sales Service: (Customer-centric)
Warranty Period:From the date of delivery, our company offers 12 months of comprehensive maintenance and warranty for the entire equipment, with lifetime repair and maintenance services.
Warranty Information:During the warranty period, we offer free repairs and replacement of certain parts in case of quality issues. Outside the warranty period, replacement parts will be charged at the market cost price of the components only.
After-sales Service:Our company received a customer's after-sales service call and responded within one hour. In cases where the customer cannot resolve the issue independently, we will arrive at the customer's site within 24 to 72 hours, depending on the distance.
Service Support:Our company offers lifetime software and control system upgrades, along with free technical support for hardware components.
