Technical specifications of the above welding rod drying oven (please refer to):
Specs and Parameters: (Customizable according to customer requirements)
Inner Shell Size: See the table below for details.
Inner Shell Material: Stainless Steel Sheet
Exterior Material: Cold-rolled steel plate, surface coated (optional colors, baked paint, hammer texture paint, matte paint, spray plastic)
Frame: Channel steel angle steel integrated frame
Thermal Insulation Material: High-temperature-resistant alumina-silicate wool
Bottom Load-Bearing: Channel Frame
Support Leg: Channel steel fixed load-bearing foot or swivel castor for mobility
Heating Tube Material: Stainless steel electric heating tube, capable of continuous use for 70,000 to 80,000 hours
Heating tube distribution: Evenly distributed across the top and bottom of the case according to its size.
Door latch: Aluminum alloy bearing hinge and top and bottom buckle-type pull rod
Factory Components:
1. Mesh plate trolley
2. Product Manual
3. After-Sales Maintenance Warranty Card
4. Product Compliance Certificate
5. Comprehensive Tool Kit
Optional Configurations: See Optional Items
Product Main Technical Parameters: (Please refer to)
Special specifications and requirements can be customized upon request.
Performance Advantages: (Ongoing Improvement)
Heating SystemUtilizing far-infrared heating technology, it boasts high radiation efficiency and faster heating speeds. The heating tubes are evenly distributed, ensuring the system operates independently without affecting the control circuit. Both temperature control and power are calculated by the computer, automatically adjusting the heating output power based on the internal temperature to meet high-precision electrical requirements. This design is more environmentally friendly and energy-efficient.
Temperature Control SystemUtilizing a microcomputer digital display intelligent temperature controller with PID adjustment, featuring a digital timer relay, high accuracy, and clear visibility. When paired with solid-state relays, it offers continuous adjustment capabilities. Once the temperature reaches the preset value, the relay receives the temperature controller's output signal to regulate, allowing the temperature to finely fluctuate within the PID temperature range for precise constant temperature operation. This improves the accuracy of the internal temperature. The circuit is equipped with an over-temperature protector, which immediately cuts off the control power in case of instrument failure or operation error leading to temperature exceeding the set value, ensuring the safety of the products inside. The over-temperature protector can be adjusted within the approved range.
Insulation EffectivenessExcellent insulation technology, with significant sealing effect; the exterior of the box largely maintains the indoor normal temperature, exerting minimal impact on the ambient temperature.
System ProtectionLeakage protection, circuit protection, short circuit protection, overload protection, over-temperature protection.
Electrical Configuration: (Customizable according to customer requirements)
Thermometer controller:A set of intelligent digital temperature controller with automatic temperature control, precision of 0.1-1 degree, with PID adjustment.
Time Setting Device:HS48S-99.99 Timer Device, featuring manual/automatic on/off, starts timing when the temperature reaches the set value, and cuts off the heating power source once the set range is achieved.
Time-Alarm DeviceAPT/AD16 type sound and light alarm device, immediate alarm upon setting time completion, manual end alarm prompt.
Over-temperature alarm device:When the temperature exceeds the set value range, the protector immediately cuts off the control power supply.
Thermometer device:A stainless steel PT100 platinum resistance temperature sensor for precise temperature measurement, and a stainless steel K-type platinum resistance temperature sensor for use in over-temperature protectors.
Circuit Breaker Activation:Circuit breakers with residual current protection for the power supply, effectively protecting certain electrical components.
Contactor:PID+SSR (optional) output, precise temperature control accuracy, improves the stability of the temperature control components and interfaces, and extends their service life, ensuring uniformity of the internal temperature.
Current Voltage:220/380V, 50Hz, two-phase/three-phase four-wire and properly grounded.
Switches and indicator lights:Utilizing Chint brand, not prone to damage, available for use according to customer's preference or a specific brand.
Recorder:Paper or paperless recorder with USB, microcomputer integrated control system: available as per customer selection.
Equipment operating environment: (Please note)
Installation Site:Level ground, good ventilation, no severe vibration around equipment, no safety hazards, no strong magnetic fields nearby, no direct sunlight or other heat sources radiating directly, no high concentration of dust, and no corrosive, flammable, or explosive materials. Some space for operation and maintenance must be left around the equipment.
Using Air Pressure:86-106Kpa
Environmental Requirements:Temperature range: -5 to 40 degrees Celsius, relative humidity ±85% RH.
Power Source Used:Users must configure a separate air or power switch of corresponding capacity for this equipment and properly connect the ground wire.
After-sales Service: (Caring deeply for our customers)
Warranty PeriodFrom the date of delivery, our company offers 12 months of maintenance and warranty for the entire equipment, with lifetime repair and maintenance support.
Warranty Information:During the warranty period, any quality issues will be addressed with free repairs and replacement of parts. Outside the warranty period, replacement parts will be charged at the market cost of the components only.
After-sales Service:We received a customer after-sales service call and responded within one hour. In case the customer cannot resolve the issue on their own, our company will arrive at the customer's site within 24 to 72 hours, depending on the distance.
Service Support:Our company offers lifetime upgrade services for the equipment's software and control systems, along with free technical support for the hardware components.
