Technical specifications of the above welding rod drying oven (please refer to):
Specification Parameters: (Customizable according to customer requirements)
Inner Diameter Size: See below listed chart
Inner Shell Material: Stainless Steel Plate
Exterior Material: Cold-rolled steel plate, surface coated (optional colors, baked paint, hammer finish, matte finish, plastic coating)
Frame: Channel steel angle steel overall frame
Insulation Material: High-temperature-resistant Aluminosilicate Wool
Bottom Load-bearing: Channel steel frame
Support Foot: Channel steel fixed load-bearing foot or movable swivel casters
Heating Tube Material: Stainless steel electric heating tube, capable of continuous operation for 70,000 to 80,000 hours
Heating tube distribution: Evenly distributed across the top and bottom of the housing based on the size of the case.
Door Latch: Alloy bearing hinge and top-bottom扣 hook-style pull rod
Factory Components:
1. Mesh plate trolley
2. Product Manual
3. After-Sales Maintenance Warranty Card
4. Product Compliance Certificate
5. Comprehensive Tool Kit
Optional Configurations: See Optional Items
Product Main Technical Parameters: (Please refer to)
Special specifications and requirements can be customized upon request.
Performance Advantages: (Ongoing Improvement)
Heating SystemUtilizing far-infrared heating technology, it boasts high radiation effects and faster heating speeds. The heating tubes are evenly distributed, ensuring the system is completely independent without affecting the control circuitry. Both temperature control and power are calculated by the computer, automatically adjusting the heating output power based on the internal temperature to meet precise electrical demands. This design is more environmentally friendly and energy-efficient.
Temperature Control SystemUtilizing a microcomputer digital display intelligent temperature controller with PID adjustment, featuring a digital timer relay, high accuracy, and clear visibility. When paired with solid-state relays, it offers continuous adjustment capabilities. Once the temperature reaches the preset value, the relay receives the controller's output signal to regulate the temperature, ensuring it only fluctuates finely within the PID temperature range for precise恒温 operation. The circuit is equipped with an over-temperature protector, which immediately cuts off the control power in case of instrument failure or operation error leading to temperature exceeding the set value, ensuring the safety of the products inside. The over-temperature protector can be adjusted within the approved range.
Insulation performanceExcellent thermal insulation technology, significant sealing effect, the exterior of the box maintains the normal indoor temperature, with minimal impact on the ambient temperature.
System ProtectionLeakage protection, circuit protection, short-circuit protection, overload protection, over-temperature protection.
Electrical configuration: (Customizable to customer's requirements)
Temperature ControllerA set of intelligent digital temperature controller with automatic temperature control, accuracy of 0.1-1 degree, with PID adjustment.
Time Setting Device:HS48S-99.99 Timer Device, features manual/automatic switching. Starts timing when the temperature reaches the set value, and cuts off the heating power supply once the set range is reached.
Time-Alarm DeviceAPT/AD16 type sound and light alarm device, immediate alarm upon time setting completion, manual termination alarm prompt.
Over-temperature alarm device:When the temperature exceeds the set value range, the protector immediately cuts off the control power supply.
Thermometer device:A stainless steel PT100 platinum resistance temperature sensor for precise temperature measurement, and a stainless steel K-type platinum resistance temperature sensor for use with over-temperature protectors.
Circuit Breaker Activation:Circuit breakers with leakage protection for starting power, effectively protecting certain electrical components.
Contactor:PID+SSR (optional) output, precise temperature control, enhancing the stability of the control components and interfaces, and extending their service life, ensuring uniformity of the internal temperature.
Current Voltage:220/380V, 50Hz, two-phase/three-phase four-wire with earth wire properly connected.
Switches and indicator lights:Utilize Chint brand; durable, available to use as per customer's request or a specific brand.
Recorder:Paper or paperless recorder with USB, microcomputer integrated control system: available for customer selection.
Equipment Usage Environment: (Please Note)
Installation Site:The ground is level, well-ventilated, with no intense vibrations around the equipment, no safety hazards, no strong magnetic fields nearby, no direct sunlight or other heat sources radiating directly, no high concentration of dust, and no corrosive, flammable, or explosive materials. Adequate space for use and maintenance must be left around the equipment.
Using air pressure:86-106Kpa
Environmental Requirements:Temperature range: -5 to 40 degrees Celsius, relative humidity ±85% RH.
Power Source:Customers are required to install a separate air or power switch corresponding to the capacity of this equipment, and properly connect the ground wire.
After-sales Service: (Caring for Customers with Dedication)
Warranty PeriodFrom the date of delivery, our company provides 12 months of maintenance and warranty for the entire equipment, with lifetime repair and maintenance services.
Warranty Information:During the warranty period, any quality issues will be addressed with free repairs and replacement parts. Outside the warranty period, replacement parts will be charged at the market cost price only.
After-Sales ServiceWe received a customer after-sales service call and responded within one hour. If the customer is unable to resolve the issue themselves, our company will arrive at the customer's location within 24 to 72 hours, depending on the distance.
Service Support:Our company will provide lifetime upgrades for the equipment's software and control systems, and free technical support for the hardware components.
